Airsoft Sniper Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
Hello! I have a few questions about the tm vsr
* Is the stock barrel considered a tbb?
* If I put in a 130 will i have to upgrade the sears
* is it worth the extra dollars than the jg bar10?
 

·
Registered
Joined
·
12 Posts
What's the ID of a stock barrel? What are you looking for in your barrel? Tight bore is not always better a bigger factor is the quality of the barrel.

You don't have to upgrade anything, But it is recommended that you do.

Do you enjoy your vsr? If so yes it was. Both guns could use the same upgrades.
 

·
Registered
Joined
·
1,159 Posts
Tokyo Marui is better than Jing Jong, but the BAR-10 has higher power stock and has a rubbery-feeling stock which many people prefer.

You shouldn't need to get new sears for a 130SP, but if you want to up the power then just get the BAR-10.
 

·
Registered
Joined
·
296 Posts
Depends what you're gonna upgrade. If you get sears (or better a clone zero trigger), piston and spring theres not a lot of the marui left.

Fiddle with the hop (shim etc) or do other mods then even less.

Stock TM vs JG, maybe worth it but since you could get a decent amount of upgrades for the extra money why bother with the TM?
 

·
Registered
Joined
·
228 Posts
You do not need a lot of FPS to touch someone.

I have a TM and that stays stock for one simple reason. I do not want to gut out 80% of a gun that I paid premium for to begin with. When it breaks, then upgrades will be considered.

If you have plans on going to a M130 spring, then sooner or later you will want a M150 and higher. A M130 spring in a stock the rifle will work, but the added strain on it eventually wear out the piston and sear.

Like others have suggested, the JG Bar10, should be consider if you want to gut it out for upgrades right away. Also, out of the box, the Bar10 is harder hitting.

If you get either a TM or Bar10, you should consider the TDC mod asap.

http://airsoftsniperforum.com/showthread.php?t=4634

All my VSR's have TDC mod done on them. The VFC ASW338LM is factory installed with a TDC and that is sweet.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top