Airsoft Sniper Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
Hello first off .....


So here is the deal I have a JG Bar-10 arriving today that will not stay stock for long that I can promise. I went with the JG since it had decent reviews and I plan on doing some heavy mods to the stock like adjustable butt plate and cheek plate so I didn't want a high investment if it all went south I have seen the videos of the french gentleman that modded his and I plan to steal some of his ideas but not go as far as he did. I plan on foam filling the stock also, but what I'm looking at is making a bipod that folds up into the stock and I have not found anywhere any videos or how-to's if anyone has done it before.

So has anyone seen it done before and if so can you direct me to pictures or links?

Another question has anyone ever foam filled the barrel to provide a very stable point for the inner barrel?
 

·
Premium Member
Joined
·
1,103 Posts
Livonia said:
Welcome to the boards. Please use some better punctuation so your posts are easier to read.

If your rifle has a front sling/bipod mount you can purchase this.
http://www.airsoftgi.com/product_info.php?products_id=1629

Here is what the mount piece looks like.
http://www.airsoftgi.com/product_info.php?products_id=1643
Hey, you posted as i was typing my answer.


The BAR-10 will have the stud, but he was looking for something that folded up into the stock.

P.S.- Sorry for the double post mods.
 

·
Registered
Joined
·
1,045 Posts
Closest I've done to what you are asking is on the rifle on the far left.....

The bipod stud is drilled and tapped into the outer barrel and then zip tied into place to stop it twisting.

It then folds up inline with the stock but not actualy into it.

Food for thought ;)

 

·
Registered
Joined
·
107 Posts
Discussion Starter · #6 ·
Livonia said:
Welcome to the boards. Please use some better punctuation so your posts are easier to read.

If your rifle has a front sling/bipod mount you can purchase this.
http://www.airsoftgi.com/product_info.php?products_id=1629

Here is what the mount piece looks like.
http://www.airsoftgi.com/product_info.php?products_id=1643
Will try to do better but I'm a ******* so English is not my first language... ;)

Problem with that is that it folds forward I'm looking to fold back...

[quote="silentfury214":b3pe3ap6]1. Make an intro post.
2. As far as i know, the bipod/stock thing hasn't really been done to the BAR-10. But if you REALLY wanted to do it, here are my $0.02, or
 

·
Registered
Joined
·
107 Posts
Discussion Starter · #8 ·
Found it ....

So after getting the gun it looks to have the room I need to do it. So I will start cutting for a few other projects I have planned on the butt end, then start work on the bi-pod. :)
 

·
Registered
Joined
·
1,011 Posts
Vindicare, you seriously need to open a business on spraypainting fine pieces of work. Everytime you post pictures it's more often then not the best paintjob I've seen in a while.
 

·
Registered
Joined
·
3,975 Posts
Not gonna happen the way you are wanting it to.

Think about it.... you want a bipod to fold up into the forend of the stock. Correct?
Where does the mag go?

You can make it work.... but you are going to have a really small bipod. If you are even able to get one in there.
 

·
Registered
Joined
·
3,975 Posts
A gas rifle maybe ..... but not a spring.

There is actually a company that makes a 10/22 stock that has just this. Really cool idea honestly. But don't think it would work in the spring rifle area.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top