Airsoft Sniper Forum banner

First post and question about Bipods

2144 Views 14 Replies 7 Participants Last post by  silentfury214
Hello first off .....

So here is the deal I have a JG Bar-10 arriving today that will not stay stock for long that I can promise. I went with the JG since it had decent reviews and I plan on doing some heavy mods to the stock like adjustable butt plate and cheek plate so I didn't want a high investment if it all went south I have seen the videos of the french gentleman that modded his and I plan to steal some of his ideas but not go as far as he did. I plan on foam filling the stock also, but what I'm looking at is making a bipod that folds up into the stock and I have not found anywhere any videos or how-to's if anyone has done it before.

So has anyone seen it done before and if so can you direct me to pictures or links?

Another question has anyone ever foam filled the barrel to provide a very stable point for the inner barrel?
See less See more
1 - 3 of 15 Posts
Livonia said:
Welcome to the boards. Please use some better punctuation so your posts are easier to read.

If your rifle has a front sling/bipod mount you can purchase this.

Here is what the mount piece looks like.
Will try to do better but I'm a ******* so English is not my first language... ;)

Problem with that is that it folds forward I'm looking to fold back...

[quote="silentfury214":b3pe3ap6]1. Make an intro post.
2. As far as i know, the bipod/stock thing hasn't really been done to the BAR-10. But if you REALLY wanted to do it, here are my $0.02, or
Found it ....

So after getting the gun it looks to have the room I need to do it. So I will start cutting for a few other projects I have planned on the butt end, then start work on the bi-pod. :)
1 - 3 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.