[Bearth]

hello guys, I am new to the forum and decided I want to start playing airsoft, but do not know which rifle should I buy, I was thinking about getting the mb4411 well but I realized that if i need i could not change the handguard because it has a specific format to fit receiver.i thinked also in the matrix marui l96 clone however do not know if there are many upgrades for this weapon, and also has no rails, am looking for a modular rifle (MSR type, fn ballista) that I can change the stock, handguard, etc. however as taxes are very high in Brazil can not pass the 200U $$

Ps:also thought about buying the blazer the king arms but she also does not have rails and do not have many upgrades, however I found the straight pull bolt cool, is turning a rotating bolt on a straight pull bolt possible?

 

[SteelSolace]

For a starter gun, I highly recommend a TM if you have the cash, which It sounds like you dont, then I would get a JG Bar-10. Cheap, 100% vsr part compatible, decent quatlity all around.

Also welcome and put an intro post before the mods get you!

 

[p2skater1]

*make an intro possstttt* also there aren't really any rifel that are cheap with the tactical rail style, but you can attach you own rails with my guide: http://www.airsoftsniperforum.com/3...nt-more-attachments-your-rifel-look-here.html if you buy a lot if rails, you can mount a long on on each side, and short ones on the bottom, and even the top of the barrel! Also I have no experience with straight pulls, but IMO there such a small difference that it's not worth it.

 

[Bearth]

Sorry ,but i dont know how to make an intro post:nuts:, i want a different rifle,bar 10 is soo common,between the matrix l96 and blaser and mb4411/4410 what is the best option?(4 future upgrades and future body upgrades((custom stocks))?) can i make a modular rifle style stock or adapt one in this guns without so much work(i really like fn ballista,m200 intervention,msr, but it do not exist in airsoft or is much expensive)

 

[GBB]

Sorry ,but i dont know how to make an intro post:nuts:

You make a new thread inside this forum: New Member Introductions & Tips - Airsoft Sniper Forum

Here's a quick explanation what you should do in your introduction post: http://www.airsoftsniperforum.com/2...ips/5955-make-introduction-post-its-rule.html

Good luck.

 

[Slayerk12]

My friend has the king arms blaser. The straight pull bolt isn't really a big deal and it doesn't really matter if it has it. He also has had a few problems with the bolt coming out of the gun... So I wouldn't get it. Stick with something that's tried and true.
Good luck!

 

[Bearth]

You make a new thread inside this forum: New Member Introductions & Tips - Airsoft Sniper Forum

Here's a quick explanation what you should do in your introduction post: http://www.airsoftsniperforum.com/2...ips/5955-make-introduction-post-its-rule.html

Good luck.

Thx:tup:,iwill make this now