Airsoft Sniper Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
571 Posts
Discussion Starter · #1 ·
Simply re-posting my solution found below, as someone else recently ran into it and it took me a bit to find my old post...
https://www.airsoftsniperforum.com/...anaka-trigger-mechanism-parts.html#post191865

Spring in question:


It seems when this occurs, the knock arm may not move, and you won't be able to fire.

My solution:

Go to your hardware store and acquire piano wire [or similar spring steel] of the correct diameter, cut it to a reasonable length to work with, shape it appropriately, trim it appropriately.




Hope this helps someone.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top