Hey all, I have owned a combat machine for two months now and it just started having problems I added an r hop about a week ago and it works good but now when I shoot sometimes they will roll out the barrel, go perfectly, or come out and sink right away. I know it's not a hop up problem because there is no grease in the barrel or bucking and I cleaned out the nozzle. The nozzle is fine and still works but it's not shooting good at all. Any one know what's up with my gun?i forgot to mention that sometimes the gun won't shoot at all and then next time I press the trigger 3 bullets come out.
Asianwarchief
G&g combat machine problems
1 reading
Have you tried backing off the hop completely and trying it? Sometimes you can over hop to the point it's causing jams. It sounds like you have a restriction in the hop up chamber. You may also want to try a different BB...
Might also be a mag issue. Are you using new mags at all?
Or tappet plate isn't returning or seating the nozzle properly.
Or tappet plate isn't returning or seating the nozzle properly.
I've tried no hop at all and it still doesn't work. I've tried 3 different bbs and all the same result.
You may have to take apart the hop chamber and get a good look down the barrel and at how the bucking is sitting in it. If the nozzle is operating correctly, then you can eliminate the back end of the gun and focus on the barrel/hop up end of things. Something may be obstructing the barrel window or the feed tube.
I have done that multiple times. Nothing is obstructing through the barrel or feed tube. The bucking is in properly. And one of my mags are a G&g high cap and the other is a jg high cap
Ok, another thing to check is how low the mag sits in the receiver. We just ran into this last week with an M16. Try firing while pushing the mag up into the mag well and see what happens.
Right on! You're back in the game...-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
