Airsoft Sniper Forum banner

G&P Lipo/ni-cad help - into buffer tube.

2259 Views 7 Replies 4 Participants Last post by  WorstInFinlanD
Ok, now I am planning to get this gun -
The gun uses deans so I have to buy batteries which use deans ok. Or if you can shhow me to a timaya to deans adapter.

I am asking you to show me what batteries will fit into that stock and what adapter if any is needed (It has crocodile clips) is needed for this charger to charge them,r:5,s:0&tx=143&ty=11
Also could the links be from ehobbyasia.

Now I am wondering if someone could point out a good Lipo (Has to fit in buffer tube)and charger combo, the cheaper the better. The lipo and charger both have to be deans of course and preferably have a stabilizer with them. You can show me a timaya lipo - but please show me an instock deans timaya adapter (has to ship to Ireland)

Batteries is one area I'm not good with, help is appreciated.

Edit - And how do you tell if the charger is compatible with the lipo - does it charge through the deans/timaya connector or through the stabilizer thing?
1 - 4 of 8 Posts
Thank you very much that is pretty much the answer I was looking for. Have some karma.
It's ok dude, I have it all sorted. I'm getting a charger which charges through the deans/timaya and the balancer, 2 G&P brand Li-pos (7.4v) designed to fit in the buffer tube, and an over-discharge alarm.

Thanks for telling me about the AEO problems with G&P's.
1 - 4 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.