Airsoft Sniper Forum banner

G&P Lipo/ni-cad help - into buffer tube.

2258 Views 7 Replies 4 Participants Last post by  WorstInFinlanD
Ok, now I am planning to get this gun -
The gun uses deans so I have to buy batteries which use deans ok. Or if you can shhow me to a timaya to deans adapter.

I am asking you to show me what batteries will fit into that stock and what adapter if any is needed (It has crocodile clips) is needed for this charger to charge them,r:5,s:0&tx=143&ty=11
Also could the links be from ehobbyasia.

Now I am wondering if someone could point out a good Lipo (Has to fit in buffer tube)and charger combo, the cheaper the better. The lipo and charger both have to be deans of course and preferably have a stabilizer with them. You can show me a timaya lipo - but please show me an instock deans timaya adapter (has to ship to Ireland)

Batteries is one area I'm not good with, help is appreciated.

Edit - And how do you tell if the charger is compatible with the lipo - does it charge through the deans/timaya connector or through the stabilizer thing?
1 - 1 of 8 Posts
I can't help you about sizing the battery's, never been good with that, but I can tell you that any lipo charger will charge any lipo. The small white plug is how lipos are charged, and the higher end balancers will also have an option for balancing it throu the deans as well as the white plug.

I always bought my battery's off hobby king.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.