[ghost ghillie]

so i got most parts and tools ready for the video.
but is there something else you guys think i need?
here is a list if the stuff im going to use

hpa parts:

mancraft SDiK vsr-10 standard
ninja LPR
bullstrike 0.8l 200bar tank (i might get a smaller one later on)

internal parts :

wide bore barrel 6.23mm inner dia
maple leaf 80degree bucking (tm one is broken)
mag sylinder (strictly for the hpa system. I dont have the guts to mess whit the stock tm one)

external parts :

3 tm mags
some fancy ass crappy g&g scope (getting a new one... again...)
adapter for the silencer (the one in the pic is not for the g-spec. i got the wrong one <,< late night shopping. new one 2-3 days away)
deep fire 300x30mm (yes this is a functioning suppressor, as there is no laws against it here in Norway.)
a suppressor cover

for the tools i will bring :

a dremel type tool whit a bunch of bits
a drill whit drill bits
lube (got 2 types a lithium baste one and some other general purpose lube)
digital caliper
a bits set whit a screw thingy (i dont know the English name or what to google to find the name :doh: )
a umbraco set.
and some tape for threads (for making a good air seal and so on)

and then the other random stuff
dslr camera
pc
mic
stand for the cam

(going to pot the link to the video here as well)
other than that ill make some notes of what went wrong and what i would do differently. for any one else trying to make a hpa baste sniper rifle :tup:

final note i will not chrono the thing when im done. as i dont have a chrono.
but it will be set to 400fps when i get my hands on one. but when i get the sniper license then ill sett it to what ever 10m SD is. and ill use it at 650fps at big games as that is the max limit for the field i play at (SD = Safety Distance)

 

[ghost ghillie]

im going to do the filming next week. as i dont have any where i can film and tech on my guns in my tiny apartment. so ill do it when im going to my mom for xmass next week,
and since she lives in the middle of nowhere i need the tips before tuesday. so i can get it before i go.

 

[ahp]

Good stuff looking forward to seeing it and the magic!

 

[ghost ghillie]

Good stuff looking forward to seeing it and the magic!

hopefully ill get the video up after xmass, and before i go to Oslo to meet my dad for new years eve. if not ill upload it next year >
he doesn't have the best of internet connections so its going to take for ever to upload it there. but my mom has a fiber connection so i might be able to render and upload it there. :tup:

 

[ghost ghillie]

sooooo.....

minor setback...

the connector to the lpr is the wrong size so i have to get a new one that fits so the video will be uploaded later than expected. im hoping i will get the stuff i need in January

other than that i need to fix the cylinder and i need to get some o-ring to dampen the noise from the gun firing as there is no cushion on the mancraft hpa cylinder
(it makes a really loud metal on metal clang noise)

ill let you guys know when its done...

other than that hope you have a nice xmass and a happy new year.
so i guess i see you next year then bye.

 

[ghost ghillie]

im going to a store today to se if i can get the adapter for the 4mm macro line.
if i get it i will be doing the rest of the filming by the week end... well at least i hope so..

 

[TiMMaTTie]

I was just wondering, is there a reason you did not get the regulator from mancraft? It seems to be cheaper and fits the 4mm hose

 

[ghost ghillie]

Okey they had the adapter i needed. so ill se if the wheater will allow me to film this weekend.


Sent fra min SM-G901F via Tapatalk

 

[ghost ghillie]

I was just wondering, is there a reason you did not get the regulator from mancraft? It seems to be cheaper and fits the 4mm hose

He mancraft reg has several "issues"
1there is no turn lock and this will make it usless on many fields
2 it has been proven hard and grindy to turn
3 this is not a new thing but the first one mancraft has made (as in they did not invent it and they have therfore probably copied someone else and that can in many cases make it worse)
4 it has been proven that the pressure varies a loot

Sent fra min SM-G901F via Tapatalk

 

[shortylumber]

Mancraft now sell regulator locks so that solves that one issue.

The regulator on mine turns nicely, but may change over time I guess. But as mine is locked off at the fps I want there's no need for me to change it.

If your pressure is off then would it be wise to redo all the seals on it and make sure they haven't dried out?

 

[ghost ghillie]

and a point i forgot...
the mancraft reg takes the macro/micro line directly.... good if your going co2 and have everything ON the rifle, but bad when you have a hpa tank in a bag on your back.
as the hose/line is prone to braking and chipping when its being bent all the time. unlike the hose on most hpa systems like the ninja reg (its a thick hose)

 

[proffrink]

I get +/- 3fps with my Mancraft reg. Who's being saying it's useless? It takes about 100-200 shots to bed in though.

 

[ghost ghillie]

filming done

soo after that miner setback im done whit the filming.
all i need to do now is som voice over work and rendering.

but a short note about the video to come.
i haven't shot it nor have i tested its accuracy or range, as i dont have any way of doing it whit half a meter whit snow and wind outside. + the fact that i only have white bb's, and i guess you see my problem there :nuts:

but then again im not going to be able to test it properly until i get a chronograph :lame: but im not in a hurry as there wont be any games i can play in a good mouth or more >

 

[ghost ghillie]

a little update on things...

i haven't manage to upload the video yet as im busy whit work and had to do some extra work on the rifle.
and i had to redo a loot of the work on the rifle as it seams like some one was in a rush when they made the cylinder i got.
long story short it was bent around the area where the trigger is going in to the cylinder

so i had to use the stock one and i was using time on that instead of the video.
but ill try to get it done before the end if this week.

 

[ghost ghillie]

another up date.
the video i initially tended to make is not going to happen.

but i will make a new one (the old one was about 5-6 hr of video and a pain to edit)

any how i got the aa chamber just waiting for the nub.
and once i get that i will make a new video and point out the things i learned during the initial build.

:shot:

 

[ghost ghillie]

okey video is done.
now its a long vid (ye this one to...)
now watch it if you want. not a must as it was made early in the moring so i could test it. (it gets dark early, and i had no clue on how long it would take.)

so is it help full?
well some parts might be but most of it is not i guess.

any way watch it on youtube. added some links (in description) to skip to parts of the video.

 

[Big Red]

okey video is done.
now its a long vid (ye this one to...)
now watch it if you want. not a must as it was made early in the moring so i could test it. (it gets dark early, and i had no clue on how long it would take.)

so is it help full?
well some parts might be but most of it is not i guess.

any way watch it on youtube. added some links (in description) to skip to parts of the video.

Earned a sub, what type of lubrication were you talking about in the video?

 

[ghost ghillie]

Earned a sub, what type of lubrication were you talking about in the video?

hehe thanks.
grease or well anything really.

i didnt change it at the time and used the old stuff left after the first build in desember.

but about 2 days ago i re did it to change some stuff. and add some more Teflon tape. and put som lube and grease in the cylinder and where it was needed.