[coldwavevsr10]

Hey guys, so I'm acquiring a G&G G96 in the near future and would like to tap the mag to run off an external source. I don't want to use a paintball tank but rather the 12 gram Co2 cartridges. I wa hopin for some insight on processes and thing I should buy (I.e brands equipment etc.) as well as tricks or tips with personal experiences. Thanks!
-Coldwave

 

[lupin2000]

Here is the best guide I found when I was looking to do mine. Really good and detailed info. Warning, this is very picture heavy, so if you are reading it on a cellphone, it will take a VERY LONG time to load.
http://www.airsoftforum.com/board/Constructing-Air-Rig-56-t127562.html

 

[coldwavevsr10]

iPhone 4 I got this(; but on topic thank you this looks perfect.
Now once you have the fixture in place you can still use the old fill valve for propane/green gas until you get the regulator and HPA tank?

 

[Cheese Man]

If you have it set up such that the fitting won't allow pressure to exit the mag, and you don't drill and tap the fill valve, then yes.

 

[coldwavevsr10]

Alright, cause its my understanding the drilling and tappin is the cheap part and I can't afford the air rig just yet.