Airsoft Sniper Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #1 ·
Well back to my thinking again guys.



Well I have my ASR, and I have been trying to figure out what I can do to her next. Well I remembered that I wanted to get a gas bolt for my VSR rifle quite some time ago. And now I have been working on a few things with my air rifles, and have thought about trying it out with the ASR.

The only thing is I can't find any diagrams or anything of the like for the inside of the gas bolts!

So that is why I am coming to you guys...... again....



Does anyone have one that they could take some pictures of the internals. I have some basic ideas of what it should look like, but the more pics are always better.
 

·
Premium Member
Joined
·
2,311 Posts
Just make an air reservoir in the back, with a solenoid that will let the pressure through in the nozzle, with a switch in the trigger. Easy. Then you could run the gas line through the back of the bolt, through the handle.

You could even do it, you own a lathe, and steel is fairly cheap right now at mcmaster...
 

·
Registered
Joined
·
807 Posts
I would go with a coaxial barrel sealing design for a bolt action build that would be actuated by a QD valve, either electric or mechanical.
http://www.spudfiles.com/spud_wiki/index.php?title=Piston_valve

Thats the nice thing about a bolty rig is that you dont have to deal with the feeding issues that you get on a semi auto rig, and its ALL POWER!!

I have a few designs that would very easily be adapted to a single shot in a bolty if you'd be interested... I haven't pursued them since I have been a little (probably a lot) too motivated to get a semi auto system that I like...

EDIT: That is if you wanted to build a custom rig... I think someone makes a gas conversion rig for the APS that would fit in an ASR...
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #4 ·
Yeah send them on over man.


I am wanting something that is totally mechanical so you don't have to worry about a power supply.

I do have a few ideas, that I am going to play with when I get some material in ;)
 

·
Registered
Joined
·
196 Posts
So are you talking about making a rifle with an external feed to a magazine or a rifle with an internal feed through the bolt?

If you're on about an internal feed I am incredibly interested in this.
 

·
Registered
Joined
·
196 Posts
Oooo, I would love to see how you do this, cause that's my dream for an airsoft sniper. Internal, gas rig with no pesky cables and no worrying about my mags running out of gas etc etc.

I will watch this space with -great- interest.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top