Airsoft Sniper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter · #1 ·
I recently acquired a gas bolt L96 and was wondering if anyone had any information on it?
The fill valve was broken hence the reason I got it so cheap but on disassembly I found all the missing pieces and have managed to get it to hold gas once more
The other path I was thinking of was to go for a CO2/HPA rig and run it off of that, I did find pictures of someone who had done a CO2 conversion on one when looking into getting it but am now unable to find it :-/
so in short what do you guys think keep it on green gas,convert it if possible or just bin the bolt and replace it with a spring?

EDIT: found the post it was a well G22 that I saw the mod on :)
http://chairsoft-press.com/articles/technical/well-g22-high-power-modification/img_0009/

EDITED EDIT: I have found a fair bit of information since I found the different version, I seem to have the G22 bolt in an L96 body ::) anyway I also found a guide on the CO2/ HPA conversion :)
http://chairsoft-press.com/articles/technical/well-g22-high-power-modification/
The fps figures quoted seem to be (well they are) too high for the field I play at but I assume turning the PSI down would bring the muzzle velocity inline with the allowance I have (500fps)?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top