[topa9495]

I am thinking of making a DMR setup on a GBBR as it is not done very often. Any advice on which base m4 would be the best? I was debating between the WE and the KJW.
Let me know what you think!
Thanks!

- Topa

 

[the3rdeye88]

I don't know much about it, but I believe there is someone on here with a GBBR DMR m4. But I do know if you get a WE from RA Tech they perform really well. Sorry I can't be of much help.

 

[topa9495]

Thats ok. I appreciate your response.
Thanks!

- Topa

 

[inthetallgrass]

Get a RA-tech WE m14! .

 

[topa9495]

Haha! Despite how appealing that might seem I have always despised the m14 design. Its design looks like a melting rifle to me if you know what i mean lol. Thanks though! I am trying to stick to the m4/m16 rout.

- Topa

 

[woogie]

What ever rifle you get, you are going to have to do a ton of work to it.

I had a we M4 that I used as a DMR, and to be honest it was quite fun. The base rifle was $350, and then all the upgrades was far more than that. And that doesn't include the mags, optics, pods and things like that.

 

[topa9495]

What ever rifle you get, you are going to have to do a ton of work to it.

I had a we M4 that I used as a DMR, and to be honest it was quite fun. The base rifle was $350, and then all the upgrades was far more than that. And that doesn't include the mags, optics, pods and things like that.

Was the WE easy to mod? Can it take aeg externals and are parts accessible?

-Topa

 

[the3rdeye88]

Oh I'm sure it will be able to take aeg and real steel. That should all interchange. Internals is what you need worry about.

 

[topa9495]

Ok that's good! Ra-tech seems to take care of all the internal issues and upgrades. It seems like alot of the WE m4/m16 style gbbrs cannot be shipped into the US due to regulations I wish there was a way around it.

- Topa

 

[the3rdeye88]

You can order the parts and do the work yourself though.

 

[woogie]

The WE will mostly take real steel parts. If you try to use any AEG parts you are going to find yourself doing some mods to make them fit.

Though there have been people that have taken real AR bodies and worked them to fit with the WE system.

 

[akfortyseven]

Though there have been people that have taken real AR bodies and worked them to fit with the WE system.

I believe that is why they are hard to get into America

 

[goldentrigun]

They sell the G&P woc DIY systems in the US.
I can't comment on the quality though.

http://www.ebay.com/itm/WE-GBBR-M4-Condo....#ht_500wt_1361

 

[woogie]

Nope wrong about the customs. Even if you mod a lower you still have to use the airsoft parts.

 

[topa9495]

Thanks for all the input!!
http://www.ebay.com/itm/M16A3-WE-FULL-METAL-GAS-BLOW-BACK-/320834562834?_trksid=p4340.m1374&_trkparms=algo%3DPI.WATCH%26its%3DC%252BS%26itu%3DUCC%26otn%3D15%26ps%3D63%26clkid%3D5889789355864135721#ht_500wt_1202
Is this worth the bidding?
Looks almost set up!

- Topa

 

[wesley810]

Looks like a pretty damn good deal depending on how high the reserve is.

 

[woogie]

You have an email my good man.....

 

[quigly]

They sell the G&P woc DIY systems in the US.
I can't comment on the quality though.

To the best of my understanding, if you have the know how and the proper tools to put it together yourself, it is just as high quality as the normal WOC. Plus then if you were to buy something like the RA tech hammer set and N.P.A.S., you have the advantage to put them in without having to deal with all the grease and the like. Plus you can deburr all the pars by hand to keep any metal chips out of the system. If you do those, you will have much better life out your rifle.

 

[dragon64]

What about the M16A3 from WE? Will this foot the bill? I supposed it would if modified to be a DMR... either way, I am looking at getting one for myself, as Evike has them in stock for $350

 

[dragon64]

The WE M16A3 platform has possibilities. I'll need to get some chrono and accuracy tests done on the rifle, but so far it is pretty nice: