Airsoft Sniper Forum banner
1 - 20 of 24 Posts

·
Registered
Joined
·
1,159 Posts
Discussion Starter · #1 ·
Hi guys,

I'm looking for a new side-arm and have a budget of roughly $150.
The ideal pistol would be full-metal, have a threaded barrel and be of a decent quality and performance.
I quite like the look of Glocks, and Mk.23s.

Anyone have any ideas?

Thanks, Milo.
 

·
Registered
Joined
·
158 Posts
i have a we tech glock 17 its very dependable and is super accurate up too around 100 ft its like a sniper pistol with .20 gram bbs the only down side is its really loud. it cost me $115 from amazon.com
 

·
Registered
Joined
·
318 Posts
That's my thought too. The damn things are silent too. If you want something with some more kick, try the KWA MK23. You can find it on sale sometimes, and it's a wonderful gun!
 

·
Registered
Joined
·
1,159 Posts
Discussion Starter · #7 ·
Can't believe that TM comes with LAM and Suppressor! Are they good?

And I'm not too bothered about the case it comes with as I happen to have a spare Pelican case lying around. ;)

And Spellisaac, where did you get your G17 from?

Thanks.
 

·
Registered
Joined
·
184 Posts
+1 for the tm mk23.
I would say its the best preforming pistol you can buy.Ultra quiet with good range and power.
Plus if you really want to you can fit a g-spec 303 barrel, the fps hits about 420fps, but range is also improved a lot.

Only downside is the size with the silencer attached
 

·
Registered
Joined
·
1,159 Posts
Discussion Starter · #11 ·
I do like the look of the TM Mk.23. The KWA Mk.23 costs about the same but doesn't come with a suppressor and LAM unit so I'll probably go with the TM.
Thanks all.
 

·
Registered
Joined
·
1,159 Posts
Discussion Starter · #13 ·
Fixed slide is putting me off slightly from the TM. I'm looking in to the KWA's and I'll get a suppressor for it later on, unless I change my mind when I actually get hands on with the weapon.
 

·
Registered
Joined
·
318 Posts
There's no sense in putting a suppressor on a GBB unless you want a longer barrel. It doesn't really quiet a GBB any.
 

·
Registered
Joined
·
241 Posts
Fixed slide is putting me off slightly from the TM. I'm looking in to the KWA's and I'll get a suppressor for it later on, unless I change my mind when I actually get hands on with the weapon.
There's no sense in putting a suppressor on a GBB unless you want a longer barrel. It doesn't really quiet a GBB any.
I feel your pain, I couldn't deal with the lack of blowback, but if you don't really mind, then that's probably the best gas pistol you can find when you add on the VSR inner barrel.

And I agree. I would put a long barrel in any pistol I could. What barrels are compatible with the TM MEU, that would fit in a Gemtech Blackside?
 

·
Registered
Joined
·
384 Posts
Is the pistol capable of taking propane or HFC only?
 

·
Registered
Joined
·
1,159 Posts
Discussion Starter · #19 ·
Alright, scrap the suppressor. KWA Mk.23 should do fine for me.
Unless I can find a decent Glock within the budget!
 

·
Registered
Joined
·
1,159 Posts
Discussion Starter · #20 ·
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top