Airsoft Sniper Forum banner
1 - 2 of 7 Posts

· Registered
Joined
·
184 Posts
Ive been trying to fallow the p* as much as possible,as I'm very interested in getting one and the fact that I've yet to hear on one being used in the UK.

There does seem to be a large problem with controlling the fps and sites banning them though.
I don't see there being anymore of a problem with people upping the fps compared to any other quick change rifle, but there does seem to be issues with players and site understanding the power due to the poppet valve and bb weight adding power creep.(cheating the crono).
I see some sites now test with the bbs used and then recalculate into jules.

Its a bit sh*t that players cant be trusted to use these though, and why should they be singled out more than others,this happened to the PTW owners before the p* came along.
In the Uk there seems to be a lot less of a trust issue though. If you do get found to be cheating especially at large games here you can expect to be banned and your name circulated to other sites and forums.
 

· Registered
Joined
·
184 Posts
The issue is not that the croon should have .2g bbs to check.
Which they all do in the UK and have struck 350fps or 370fps for full auto, 400/420 for semi auto eag and 500fps for bolt action.

The issue is that due to the design you can open the poppet value which allow more airflow(from what I understand), so the gun may be 350fps with a .2g but add a .3g and the power will rise as the air is still fully propelling the bbs as it leaves the barrel.

I suspect that this is also a problem with gas rifles like tanaka's but gets over looked as they are single shot and not in the masses.
 
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top