Win
Gun/vests etc. personalization / customization /
Edit - new pics added
Just my vest - grimlock - trauuma shears - chemlights - electrical tape - paracord - carribbeaner - shot gun shells - sharpies - radio set - drinking tube - and magpulls - I only like their actual magpulls - nothing else it's all over-rated. Especially in Ireland.
![]()
Paracord grip beats the previous stippling.
![]()
Here is the close up I promised of the kill marker. - it's more than that like 30 or something.
![]()
And I might wrap my scope and silencer again with bandage wrap again cause it looked cool.
![]()
I know, I know another one of these threads BY ME.
I have seen, probably like thousands of pictures of airsoft guns with forward grips, peq boxes and scopes. I would just like to see what some of you have done to make the gun your own, like personal little touches such as a stippled grip, a saying spraypainted on like "Get Some!"
Oh and I would like to see the little touches on any gun you have, be it sniper rifle, SMG, DMR, assault rifle, support weapon, pistol or even shotgun.
As I said in my other gallery post, feel free to move to the lounge if you deem it inappropriate in the gallery.
I'll give you a few examples from my own guns -
Like here is my vest. I put in trauma shears, chemlights, sharpies, I also had zipties but I lost them and then at the back a few caribeaners with electrical tape and paracord. Oh and I have a radio and headset which wasn't on it. Edit - And shotgun shells.
![]()
HEre I have my sniper rifle with a patch, a paracord grip and engravings in the stock to count my kills with the gun. Oh and my custom mag and my paintjob. (I have a red dot on it cause I broke my scope - the second one in a month
) |Oh and a paracord sling I made
![]()
Just my name on my mag and a paracord bracelet I made.
![]()
A skull (Punisher) decal on my 40mm M203.
![]()
A battery outside my MP5K
![]()
Another punisher, This time on my MP5K.
![]()
And now finally, A paracorded stock, Another punisher skull and a captain insignia. And up the top you'll see my knife handle which had paracord on it too.
![]()
Then here I wrapped the stock in green and the outer barrel in green too. (This was taken a While ago so the M203 doesn't have the skull on it)
![]()
And now, my baby. I just sanded it myself, polished it and put some wooden grips on it.
![]()
As you can see I like too personalize my guns a bit, and I like paracord!
![]()
Edit - and my room is a mess...
Let's see what you have done. And I am sure everyone would like feedback on their stuff.
Just my vest - grimlock - trauuma shears - chemlights - electrical tape - paracord - carribbeaner - shot gun shells - sharpies - radio set - drinking tube - and magpulls - I only like their actual magpulls - nothing else it's all over-rated. Especially in Ireland.
Paracord grip beats the previous stippling.
Here is the close up I promised of the kill marker. - it's more than that like 30 or something.
And I might wrap my scope and silencer again with bandage wrap again cause it looked cool.
I know, I know another one of these threads BY ME.
I have seen, probably like thousands of pictures of airsoft guns with forward grips, peq boxes and scopes. I would just like to see what some of you have done to make the gun your own, like personal little touches such as a stippled grip, a saying spraypainted on like "Get Some!"
Oh and I would like to see the little touches on any gun you have, be it sniper rifle, SMG, DMR, assault rifle, support weapon, pistol or even shotgun.
As I said in my other gallery post, feel free to move to the lounge if you deem it inappropriate in the gallery.
I'll give you a few examples from my own guns -
Like here is my vest. I put in trauma shears, chemlights, sharpies, I also had zipties but I lost them and then at the back a few caribeaners with electrical tape and paracord. Oh and I have a radio and headset which wasn't on it. Edit - And shotgun shells.
HEre I have my sniper rifle with a patch, a paracord grip and engravings in the stock to count my kills with the gun. Oh and my custom mag and my paintjob. (I have a red dot on it cause I broke my scope - the second one in a month
) |Oh and a paracord sling I made
Just my name on my mag and a paracord bracelet I made.
A skull (Punisher) decal on my 40mm M203.
A battery outside my MP5K
Another punisher, This time on my MP5K.
And now finally, A paracorded stock, Another punisher skull and a captain insignia. And up the top you'll see my knife handle which had paracord on it too.
Then here I wrapped the stock in green and the outer barrel in green too. (This was taken a While ago so the M203 doesn't have the skull on it)
And now, my baby. I just sanded it myself, polished it and put some wooden grips on it.
As you can see I like too personalize my guns a bit, and I like paracord!
Let's see what you have done. And I am sure everyone would like feedback on their stuff.
14
21 - 36 of 36 Posts
Should probably contribute something while I'm here. This is my VSR, customization includes home made cheekrest made out of leftover material from ghilliemaking, paracord sling attachment points and stippling to grip and forearm.
![]()
I also tried out something I've been thinking about for a while, adding a holster to the rifle.
![]()
![]()
Obviously the M9 is way too big for this and the straps attaching the holster to the rifle removes access to the magazine but with a subcompact pistol like a G26 or a detonics and a better mounting solution it might be worth trying, or has it been done already?
My theory is that it would be rather more practical than drawing from a hip or thigh holster while prone if, say, a target suddenly pops up within your MED and you've been, or risk being, spotted. It would certainly add additional weight to your rifle and make dragging it (while doing the "sniper crawl" for instance) more difficult but if properly ghillied along with the rest of the rifle I don't think it would compromise your camouflage. I'll certainly be trying it out when I get a hold of a subcompact pistol with accompanying CQC holster, at least as a complement to my regular sidearm. I would much rather prefer this solution to other stock mounted holster solutions I've seen which end up pointing the business end of the pistol into your shoulder.
I also tried out something I've been thinking about for a while, adding a holster to the rifle.
Obviously the M9 is way too big for this and the straps attaching the holster to the rifle removes access to the magazine but with a subcompact pistol like a G26 or a detonics and a better mounting solution it might be worth trying, or has it been done already?
My theory is that it would be rather more practical than drawing from a hip or thigh holster while prone if, say, a target suddenly pops up within your MED and you've been, or risk being, spotted. It would certainly add additional weight to your rifle and make dragging it (while doing the "sniper crawl" for instance) more difficult but if properly ghillied along with the rest of the rifle I don't think it would compromise your camouflage. I'll certainly be trying it out when I get a hold of a subcompact pistol with accompanying CQC holster, at least as a complement to my regular sidearm. I would much rather prefer this solution to other stock mounted holster solutions I've seen which end up pointing the business end of the pistol into your shoulder.
3
wow I think thats really creative to put a holster on your rifle
![]()
gotta try it out myself too
Oh and here is my rig + stubby shot gun attachment on the back.
![]()
![]()
![]()
3
Ok, but the way you have your shot gun strapped on the back seems awkward to retrieve, do you keep it just for breacing etc? Cause they are extremely light, you don't even notice having them on your back.razgriz22 said:
...you seeing the phantom menace on feb 10th?
I am.
21 - 36 of 36 Posts
