Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
716 Posts
RS will be cheaper for the handguard than PTS. You need some sort of gas block in order to attach the hand-guard ring, unless you have a full flip up front sight as opposed to a RIS mounted flip up front sight.

I can't name companies off the top of my head, but many make barrels that would accomodate a 9" hand guard. The 6" is intended for an M4 length gun, the 9" is more of a mid-length RECCE type gun, possibly an SPR, and a 12" is intended for an M16 length gun.

Hope that helps.
 

·
Premium Member
Joined
·
716 Posts
razgriz22 said:
Thanks for the input. I know my current set up accommodates the 12 inch hand-guard. I was more or less curious about mid length hand-guards. With the link I provided, does that front sight automatically work with a hand-guard ring? Because that is what I have.
Yes, you just need the ring then.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top