[Swollen.D]

I've found 65g the perfect weight for your bbs.

At some point you should upgrade the trigger in there to mine tbh. Not selling here. I just know that with a 4j spring, your pull is gonna get scratchy af really fast without a preemptive solution. Especially with the novi setup.

The rifle you bought sounds pretty great. Throw a Masada arm in it and you're golden for a long time. If it has a modify barrel, I would try an X-range 70 deg bucking. They're made for eachother and I've heard the combination yields fantastic results. My current build will use one of those buckings.

The esc will probably only net you like 20 fps. Idk if its worth it.

Is that 65g piston weight just based on BB weight or does is factor in barrel and spring strength ? In the guideI've seen that Spring and Piston ratios do matter a lot.

 

[SiliconeSword]

Is that 65g piston weight just based on BB weight or does is factor in barrel and spring strength ? In the guideI've seen that Spring and Piston ratios do matter a lot.

It['s based on both, you sort of have to experiment with it.

 

[Swollen.D]

I have directly connected Rapax on Facebook, asked for difference between Hulk 4j & Rms 4j.
Hulk is longer and is easier to pull, while Rms is shorter and harder to pull.
As for compatibility I was told that none of his springs are made for stock vsr10 and require piston and spring guide upgrade. Since ssg10 ain't vsr10, no upgrades are needed for hulk work in ssg10. That's what I gathered, I am tempted with hulk, did anyone try it in their ssg10?

 

[Sodium]

I have directly connected Rapax on Facebook, asked for difference between Hulk 4j & Rms 4j.
Hulk is longer and is easier to pull, while Rms is shorter and harder to pull.
As for compatibility I was told that none of his springs are made for stock vsr10 and require piston and spring guide upgrade. Since ssg10 ain't vsr10, no upgrades are needed for hulk work in ssg10. That's what I gathered, I am tempted with hulk, did anyone try it in their ssg10?

It's a marketing gimick. The pull is barely different. There have been like 3 posts in the last two weeks from people saying they wish they got the RMS spring because the regular didn't fit. And the ease of install of the RMS is also wonderful. The regular's a bitch. I've broken o-rings with it.

 

[Lightf4ng]

The fact that you got a Philippino word I will make it simple for you.

Action Army T10
EDGI JURASSIC KIT
EDGI BULL BARREL 500MM 6.01 (tell edgi what hop rubber you plan to use so that he will make the correct cut for the window)
Maple Leaf MR Hop 80 degree (do not get 2021 ver)
EDGI SP03 SPRING (equivalent to m190 to m200)
AA Hop Chamber
Tridos TDC 2.0


Then you set the SAP at 130g. If you do this you will get 6.66J (546 fps with .48)

I also think that if you DIY the piston and add more weight, the J would still increase.

This build will definitely deserve the Crazy Filipino name you want