[Tgt26]

I have a jg bar10 and I shoot .20 to .25 bbs.

I have done nothing to the gun. I am on a budget but I would like to know what would be some important things to upgrade to get more range and accuracy.
Also if you know of any good videos to help they would be greatly appreaced,
And where the best place to buy parts.

Thanks alot

 

[MiloXC3]

Please do some research

TDC hop-up adjuster (There's a sticky thread in the General Discussion section),
R-hop,
Full-length barrel spacer,
A high-quality inner barrel (EdGI and Laylax are popular choices on a budget)
High quality ammo, what fps are you shooting at? .20 and .25 are both very light...

 

[13camtheman]

I might be getting a bar-10 eventually too.First buy a new spring,piston,and the spring guide.You can buy these off of airsoftgi.com .I would start with these upgrades then eventually do more.These dont cost to much either.So these might be in your budget.

 

[Pinguiclia]

Go with what Milo said, also upgrade accuracy parts before power. A rifle shooting 450fps is nothing compared to the 350fps rifle hitting man sized targets at 250ft consistently.