Airsoft Sniper Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi Im new to these boards. I have been playing airsoft for 3 years and have been a DM for about a year. I play in SoCal, mainly at my local fields Poso creek,Havok CQB and Mountain top paintball.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 ·
hey I usually run my multicam but i also have acu and a ghillie. I have a king arms mps plate carrier with radio pouch admin pouch and dump puch all in od i use an od mesh lower face shield and arena flackjak goggles.along with a multicam contractor hat.On to the guns,I have my mk.16 dmr custom with many mods diy and bought.i have a jg m4 cqb.Src m4a1 in tan and the VFC m4 tactical carbine with the Element zism scope
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #7 ·
Well the SRC Exceeded my expectations by far. Stock it has an amazing ROF on a 9.6v . fps wise it was meh at a 350.but they are no match the vfc exceeds the src in everything. ps sorry about the I's my shift key is finikey
 

·
Registered
Joined
·
2,199 Posts
foxtrot1 said:
Well the SRC Exceeded my expectations by far. Stock it has an amazing ROF on a 9.6v . fps wise it was meh at a 350.but they are no match the vfc exceeds the src in everything. ps sorry about the I's my shift key is finikey
Well FPS can be upgraded and it is built to last with a 400fps spring actually but they have in a 328 because they sell to players in europe mainly where there is a lot of 1 joule or 328fps limits. There is a perfect airseal with them usually, there was with mine and the rate of fire is good too. The only things I'd change are the nozzle, hop up unit and the barrel. (And bucking of course)

The barrel, stock is a 6.04-6.05 varies on model. The hop up is a little prone to double feeding and for some reason the nozzle o ring can break so I'd just replace the three and you are all set for a great gun.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top