[Lightf4ng]

Hi. I saw this post on FB. I'd like to know what you guys think of this:

"Just sharing these 2 MLC338
MLC 338 and 338 Gspec
Maximizing them with the stock spring.

Mlc 338 shooting [email protected]
With autobot 50° bucking and 65grams piston and 23mm airbrake

Mlc 338 gspec shooting [email protected]
With autobot 70° bucking and 80grams piston and no airbrake."

The piston is too heavy perhaps?

 

[RonSwanson]

I don't get the question?

The longer barrel is shooting hotter which it would as g spec barrels are too short to use the same spring.(need a tougher/higher power to make up for less BB acceleration available due to shorter barrel)

 

[SiliconeSword]

I don't understand, but there's too many variables to really answer the question

 

[Lightf4ng]

The first MLC has longer barrel, airbrake, softer rubber, heavier piston, and it is undervolumed for .48 but is hotter.

The gspec one has heavier piston, shorter barrel, harder rubber, closer to optimal volume,but shoots weaker

 

[nearsighted_ash]

Hi. I saw this post on FB. I'd like to know what you guys think of this:

"Just sharing these 2 MLC338
MLC 338 and 338 Gspec
Maximizing them with the stock spring.

Mlc 338 shooting [email protected]
With autobot 50° bucking and 65grams piston and 23mm airbrake

Mlc 338 gspec shooting [email protected]
With autobot 70° bucking and 80grams piston and no airbrake."

The piston is too heavy perhaps?

It's definitely not the airbrake, if anything the airbrake would reduce your fps. Just remove the airbrake on the first gun and test again.