Airsoft Sniper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
few ideas I have of potential problems. first off when you cleaned it did you use silicone oil or something similar when lubricating the O ring for the piston. because if you overlube the O ring it can coat your bucking with silicone oil and make it basically ineffective. another thing you may want to double check is your nub, could have broken in the reassembly, and this could be what's causing your gun to shoot as if there's no hop up applied. As for the potential misplaced spring just look up a picture or video of a VSR10 Hop up disassembly.
best of luck!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top