Airsoft Sniper Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
What would be the best hop-up to put in a jg bar-10 without modification. Include other things good to get with it like buckings.
pdi requires an aeg barrel so it's a no-no.
 

·
Registered
Joined
·
66 Posts
a nineball hopup bucking is only on his best in a laylax airseal chamber
a normal hopup unit from jg, or even TM is good,, only better when you have a good rubber in it!

nine ball hopup rubber is nothing like a normal rubber :)
its BETTER
 

·
Registered
Joined
·
292 Posts
I like the Nineball and KA but they are a little stiff for near stock to 500+FPS in my opinion. I believe they are 70 durameter hardness which associated with 600FPS. I would try a KM RH55 for things around and under 450FPS. They are meant for 350FPS but I'd rather have a softer bucking than too hard of one. They still have the V-hop cut in them like the firefly. I would tell you to get a Firefly but their AEG buckings have been spotty lately so a its a bit of a gamble.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top