That is a great vest/backpack you found. I wear a molle belt and lying prone I have no trouble getting to mags. One question: are you wearing a ghillie suit because how would you get inside to the pouches?
Hoping you guys could help with a loadout
Alright, I'm currently saving up for a Kokusai Crimebuster, for those of you who don't know what that is, it's a classic airsoft NBB, incredibly efficient and consistent setup. When Booster tunes them they are accurate out past 350' at 550 FPS (.2 chrono, .4 in operation) and reports have been made of out past 450'.
In the following loadout I have organized everything that I think I will need and have found the items I think best fit my needs. I know that this loadout is basically overkill, but I think the name speaks to my view on that. If you guys could just go over the practicality of this and shoot me down if I am wrong I would be much abliged.
On to the good stuff:
It is an HPA gun, so I'll be using a Crossfire tank:
http://www.crossfireinc.com/products.asp?cat=29
Reg system will be bought from Austinwolv on the classicairsoft forums, very reliable two reg system, might ask for a valved main reg to depressurize the system after use.
http://classicairsoft.org/forum/showthread.php?9002-WTS-Pre-assembled-dual-reg-gas-rigs
Grimlocs to hold lines to web gear:
http://www.tripleaughtdesign.com/Equipment/Clips/Grimloc-Carabiner
Two 90 degree panels to rotate tank pouch across lower back rather that directly up the back (lower profile): http://www.tacticaltailor.com/90degreepanel.aspx
Frag pouch to hold Secondary regulator: http://www.diamondbacktactical.com/product/Diamondback-Tacticalreg-Frag-Grenade-Pouch-Single,225,49.htm
Pouches to carry 3-4 mags:
http://www.octactical.com/ar20rndmag.html
PALS weapons catch (DBT if possible)
Pouches for two MP9 mags:
http://www.usgruntgear.com/hksubgunmodo.html
Throat Mic:
http://www.soundrite.biz/headset/nt3blkops2-description.html
(already have motorola Talkabouts for radio, need radio pouch)
The vest this will all be on:
http://www.grtgear.com/Products/GrandRiverTacticalVestSystems/LBV3/
This will all go over a ghillie (homemade over this summer) with jute/burlap tied into the molle and hairbands/rubber bands to tie in natural veg. This is where I am a little concerned. How do you guys think it will work running a vest over a ghillie, should I just ghillie up the arms and a little on the sides, leaving the middle open for the vest, or should I make a full crawl suit and just put the vest on over the jute?
The other thing is, if I'm going to sling the rifle at all, I will have to use a single point, as the forward sling mount isn't very strong. How will this work with transitioning to my planned secondary (KWA MP9R)? Should I plan on only using the MP9 when pinned down and unable to get out, in which case I wouldn't need a sling for the Crimebuster and the plan for engagement would be to drop the rifle, pull the MP9 off the weapons catch, and fire. If I got a single point sling, I could fire the MP9 while extracting, although that might not even work. What do you guys think?
Thanks for your help.
Sam
In the following loadout I have organized everything that I think I will need and have found the items I think best fit my needs. I know that this loadout is basically overkill, but I think the name speaks to my view on that. If you guys could just go over the practicality of this and shoot me down if I am wrong I would be much abliged.
On to the good stuff:
It is an HPA gun, so I'll be using a Crossfire tank:
http://www.crossfireinc.com/products.asp?cat=29
Reg system will be bought from Austinwolv on the classicairsoft forums, very reliable two reg system, might ask for a valved main reg to depressurize the system after use.
http://classicairsoft.org/forum/showthread.php?9002-WTS-Pre-assembled-dual-reg-gas-rigs
Grimlocs to hold lines to web gear:
http://www.tripleaughtdesign.com/Equipment/Clips/Grimloc-Carabiner
Two 90 degree panels to rotate tank pouch across lower back rather that directly up the back (lower profile): http://www.tacticaltailor.com/90degreepanel.aspx
Frag pouch to hold Secondary regulator: http://www.diamondbacktactical.com/product/Diamondback-Tacticalreg-Frag-Grenade-Pouch-Single,225,49.htm
Pouches to carry 3-4 mags:
http://www.octactical.com/ar20rndmag.html
PALS weapons catch (DBT if possible)
Pouches for two MP9 mags:
http://www.usgruntgear.com/hksubgunmodo.html
Throat Mic:
http://www.soundrite.biz/headset/nt3blkops2-description.html
(already have motorola Talkabouts for radio, need radio pouch)
The vest this will all be on:
http://www.grtgear.com/Products/GrandRiverTacticalVestSystems/LBV3/
This will all go over a ghillie (homemade over this summer) with jute/burlap tied into the molle and hairbands/rubber bands to tie in natural veg. This is where I am a little concerned. How do you guys think it will work running a vest over a ghillie, should I just ghillie up the arms and a little on the sides, leaving the middle open for the vest, or should I make a full crawl suit and just put the vest on over the jute?
The other thing is, if I'm going to sling the rifle at all, I will have to use a single point, as the forward sling mount isn't very strong. How will this work with transitioning to my planned secondary (KWA MP9R)? Should I plan on only using the MP9 when pinned down and unable to get out, in which case I wouldn't need a sling for the Crimebuster and the plan for engagement would be to drop the rifle, pull the MP9 off the weapons catch, and fire. If I got a single point sling, I could fire the MP9 while extracting, although that might not even work. What do you guys think?
Thanks for your help.
Sam
1 - 3 of 17 Posts
U should cut a piece of netting the size of the backpack, ghillie it up, then attach it over your back pack using wire or something that allows you to remove it easily. Thats what I would do. I know plenty about the potential power of Hpa rigs but 450' seems just a little too much.
Fix for your sling dilemma:
http://www.airsoftgi.com/product_info.php?cPath=28_95_179&products_id=938
If you have to infiltrate a building ur gonna be screwd with a 1 point. Also with a 1 point the weight of the gun is gonna be put only on your shoulders/neck area. I understand the gun isn't 2010/2011 build quality, this probbaly means its going to be heavy(possibly not using aluminium?). So your going to want more than 1 attachment.
Fix for your sling dilemma:
http://www.airsoftgi.com/product_info.php?cPath=28_95_179&products_id=938
If you have to infiltrate a building ur gonna be screwd with a 1 point. Also with a 1 point the weight of the gun is gonna be put only on your shoulders/neck area. I understand the gun isn't 2010/2011 build quality, this probbaly means its going to be heavy(possibly not using aluminium?). So your going to want more than 1 attachment.
Well When entering a building with a single point and your not able to wrap the rifle around your body because of your gear and you have to extract your pistol from your holster, the rifle will bounce in the genital aea and sprinting would be a pain. With a 3 point or a 2-point like the Irene sling you can tighten it tou your body.
1 - 3 of 17 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Airsoft Sniper Forum
A forum community dedicated to Airsoft Sniper firearm owners and enthusiasts. Come join the discussion about optics, gunsmithing, styles, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
Top Contributors this Month
View All
SiliconeSword
121 Replies
Leo Greer
69 Replies
Akami
56 Replies
Recommended Communities
