[aydonmill]

I was just wondering if anyone could tell me how to install my PDI hop-up unit into my TSD SD96B. A tutorial would be very nice Also, I have a 650mm 6.03 barrel and if you could tell me how to install that it would be greatly appreciated.

 

[aydonmill]

Thanks

 

[aydonmill]

Don't worry guys I've already got all that stuff I wouldn't buy such a long barrel if I couldn't make it work.

 

[aydonmill]

Even with a Teflon cylinder, PolarStar 90 degree piston and an upgraded cylinder head?

 

[aydonmill]

I guess so, except I will see what happens when the hop up is delivered this week.

 

[aydonmill]

Hang on, explain to me again why the 650mm wont work. Having a little trouble understanding.

 

[aydonmill]

Installed the PDI Hop-Up and the 650mm 6.03 about 2 hours ago... no problems whatsoever

The grouping is amazing, the gun is whisper quiet, and it is shooting really hard with just the stock spring in. I have been tinkering with the hop-up for the past hour and I think I almost have it

I don't have finals tomorrow so I am staying home and I should be able to get it shooting perfectly.

 

[aydonmill]

Alright well I am shooting with .30s, so what would it be with the stock spring now? 10-15 less? Whatever that doesn't matter, anyways I really haven't done too many modifications to it. I did stuff it full of memory foam though, and a suppressor that had come with my SCAR from some guy on eBay is custom made and it makes a cool air noise when you shoot it.

I'm sure it's just so quiet because of the stock spring, I am going to put in my M170 tomorrow, I will tell you guys how the noise is then. Also, I will take pictures of the target shooting with all of my springs from like 100ft, 150ft, and 200ft. With the 650mm installed.

The stock barrel on my gun is 515mm (weird), so I am going to order a barrel a little longer than that, just to try the grouping thing like you guys said.

 

[aydonmill]

IF YOU HAVE A STOCK (What came with the gun) TRIGGER BOX DO NOT PUT AN M170 SPRING INTO YOUR GUN. Also your 14 you'll barely be able to pull it. FPS is not everything, in-fact it is over-rated in terms of accuracy. Also a Scar silencer must look horrendous on an L96. It is called a poof noise btw not an "Air" noise. and it usually only changes the tone of the noise it doesn't "Silence" it.
Look - There is a full guide in what you should upgrade with your gun. The internals etc. It should be pinned in the others section. Also Then there are other guides such a my one on how to silence your gun. Post pictures of your gun in the gallery. I want to see how ugly the scar silencer is on the gun. I have a 9 inch wisha one on mine. It is like an enlarged p90 silencer.

I never said it was a Scar-type silencer, it's a normal cylinder shaped suppressor, nothing special. I could take some pictures if you actually want to see my gun. And besides I put an M170 in my gun before ANYTHING but the stuff inside the cylinder was upgraded (it worked great). My trigger box is VERY close to breaking but a V-Trigger is getting here tomorrow. I do have a stock, M140, M150, M170, and an M190. Which one do you guys think would be the best one to put in after I get the trigger.

My normal engagement range is probably 150-200ft.

P. S. - Not able to pull it back? Yeah okay.

 

[aydonmill]

Well I am listening to you guys, but you are telling me the same thing over and over again. And you're SURE I shouldn't order a 510mm barrel? The stock barrel in my gun is 515, so that would be a little shorter... is that still no good?

And I know that the M170 was breaking my trigger box, so I opened it up and my dad is experienced with fixing air soft guns so he reinforced it so it would just hold in with the stock spring. And yes he told me that I am going to need to put in the V-Trigger if I want to use anything more powerful, because this one is a goner.

By the way, the M190 was a little tough in the beginning : But I took it out after two days because I didn't even like the results.

Prone = no chance
Crouch = a bit tough
Standing= easier as it progressed

BTW... doesn't the head mod play with a 650mm? Uh... Livonia?

 

[aydonmill]

[quote author=aydonmill board=haveauniquerifle thread=2838 post=24095 time=1308232518]

EDIT: The reason why we are saying the same things to you over again is because you keep asking the same things or making the same mistakes that we already pointed out. Lol. Look back.

Oh, my bad

Hahaha yeah so I guess I will buy the 510 or maybe even 500 today with the new trigger.

 

[aydonmill]

Well since I am being double-teamed here, and they think I have the M190 still in the gun when I have said that the stock spring is in it, and it began off topic from the beginning when someone commented on my barrel length... then no, I have no further questions

Also, I don't know what my dad did to help the trigger hold on. I didn't like stand over his shoulder and annoy him about what he was doing the whole time. He only made some mods to have it hold for like 3 days until I get my trigger. But, I really could show you a video of me pulling back the M190 with ease of you would realy like me to.