HPA Rig Questions

5869 Views 29 Replies 8 Participants Last post by hidden187, Oct 31, 2010

airsoftsniper234

Discussion Starter · Oct 2, 2010

I was wondering if a HPA rig would be better than a spring sniper. I am trying to decide whether to upgrade my spring sniper or get the KJW R700 and get a HPA rig with some other upgrades. Which one would give me better constituency in year round conditions and give me better range. Thank you for taking the time to read this.

Save

1 - 2 of 30 Posts

metallicafatcat

· #17 · Oct 6, 2010

I hate to go against the grain here, but don't get the KJW M700. If you are really active in airsoft, it would be wise to invest into a Tanaka. They are known, atleast where I'm from, to be much better in performance and reliability than Ares and KJW's. Of course though, if you just want something fun to play with, by all means, get the KJW.

Save

metallicafatcat

· #22 · Oct 8, 2010

mateba said:
Has this kid even asked about tanakas? Why is this in this section? Wow! Sniper234, are really off to a bad start.

Metallicafat,
Once you place a palmer stab/reg on your bottle you'll reg it down to 3-5PSI above your secondary reg. We are talking 70-80PSI, for tanakas and clones. Please do not bring up metal shrapnel again for your sake. That's absurd. Evens at 150PSI or 800+FPS they will not pepper your face with pot metal. If you operate a external reg right you would start with at 0PSI and increase pressure as need be and not just slam a ?PSI setting on to your bottle.

I never said anything about peppering anything with metal, or PSI...
@ Woogie, Again, I don't dislike he KJ's, but IMO they'll never be as good as a Tanaka, I'd personally go for a KJ because it is cheaper and saves myself about 350 dollars, but were not talking about myself here.

Save

1 - 2 of 30 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month