Airsoft Sniper Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello,

I was hoping someone knew if the Wolverine Bolt System or Mancraft PDiK would fit in an Action Army T11. The compatibility list for the WBS doesn’t list it but perhaps someone may have tried and had some luck. I also wasn’t sure about the M-PDiK since it does have the Action Army T10 listed but not the T11.

Thank you if you have any info, I would really like to have a HPA sniper, however if I can convert my T11, instead of buying a cheaper VSR-10 platform, that would be ideal.
 

·
Registered
Joined
·
1,718 Posts
The Wolverine BOLT old style will work, but not the BOLT M.

The SDIK will work, but the BOLT is do much better I wouldn't recommend an SDIK.

I also suggest picking up these few things if you get the BOLT, as they improve the engine immensely.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
The Wolverine BOLT old style will work, but not the BOLT M.

The SDIK will work, but the BOLT is do much better I wouldn't recommend an SDIK.

I also suggest picking up these few things if you get the BOLT, as they improve the engine immensely.
Are you referring to this one as the “old style”? Wolverine Airsoft BOLT HPA Conversion Kit for VSR-10 System Airsoft Sniper Rifles - Without Cylinder

Also I’m wondering if I would have to get the cylinder as well. My guess is yea, but I’m not sure.
 

·
Registered
Joined
·
1,718 Posts
That's the one.

No, you don't.
The T11 cylinder is probably better as it doesn't scratch too easily, being steel instead of aluminum.
Just make sure that you get the BAR10 version of cylinder head in the kit, as TM is the only one that uses TM threads, while most other people use BAR10 threading.

If you're starting from scratch, I suggest these things if you don't already have them, unless you have something that will do the same job.

 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
That's the one.

No, you don't.
The T11 cylinder is probably better as it doesn't scratch too easily, being steel instead of aluminum.
Just make sure that you get the BAR10 version, as TM is the only one that uses TM threads, while most other people use BAR10 threading.

If you're starting from scratch, I suggest these things if you don't already have them, unless you have something that will do the same job.

Thank you for all your help. I appreciate it.
 

·
Registered
Joined
·
1,718 Posts
No problem, I definitely wish someone could have guided me in the beginning lol.

The BOLT and VSR-10 are my favorite setup out of every gun I've ever used, and I've modified or replaced the majority of parts in my gun and engine to maximize performance, and I'm still going.
I dare say I'm the most knowledge on thus forum when it comes to the BOLT and VSR-10, right next to Blind Sniper and Magic Marker.

Anyways, feel free to message me if you have any issues or whatever, as some things are a little difficult at first.
 
1 - 6 of 6 Posts
Top