Airsoft Sniper Forum banner
1 - 6 of 14 Posts

· Registered
Joined
·
32 Posts
Discussion Starter · #1 · (Edited)
So Its been almost a year now since I have had my Tsd sd702(well mb07) and I feel like I just can't get it shooting right. I have the guts from a tm precision chamber(including the barrel) and it has the metal upgrade kit that came stock with it. I had a problem with hopping my BBs and now that I fixed that it just wont shoot accurately. I currently use madbull .3s and the rifle is shooting in the 510-520 fps zone. I am soon going to do the TDC mod. Any suggestions? I am simply getting frustrated with the whole project seeing as I cant even effectively hit 200 feet now.

-Also I would rather not dump a bunch of money into the rifle unless I know I can get it to shoot good. I had a king arms bucking also until it ripped..(currently using stock bucking)
 

· Registered
Joined
·
32 Posts
Discussion Starter · #3 · (Edited)
Thanks for the reply. Are there any madbull barrels available that have the vsr 10 cut? I have no luck finding any.. Also, I have a choice. I can but like 250 dollars into the sniper, or buy a cyma svd and throw in a new spring and barrel. The thing is 250 dollars could really make this gun shoot, but at the same time it could also be a waste. That's why I want to fix the current state of the gun and get it shooting at least "decent" before throwing money at it.
 

· Registered
Joined
·
32 Posts
Discussion Starter · #5 ·
Yea that is why I want the svd. Regardless though I am still interested in fixing my rifle. I know the tm barrel is considered pretty good. Depressingly the barrel has a small diameter on the inside therefore it has a proprietary chamber, although the internals are compatible. I'm almost about to just gut the chamber, redo all of it and then put it back together after the tdc. Does the nineball really make a big difference in performance?
 

· Registered
Joined
·
32 Posts
Discussion Starter · #13 ·
So is the nineball bucking as good as every one claims it is? I wouldn't mind spending the money if it is significantly better than most buckings. My king arms ripped because it was a little fat and didn't sit right and within 500 rounds it ripped open. Is the nineball really large?

I also need to try .4 gram BBs because I have to have my hop on the lowest setting for my .3s to not over-hop.
 
1 - 6 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top