Airsoft Sniper Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
387 Posts
Discussion Starter · #1 ·
Hi guys!:
I would like to know why this happens to my 1911, I have noticed that it happens in other 1911s or hi capa. Will it be normal? Or can this cause problems? Because my gun continues to fire and behave normally, but it bothers me to know that it has this, which in my opinion is not normal, and it is driving me crazy!
 

Attachments

·
Registered
Joined
·
2,888 Posts
It is just getting worn, it happens to all GBBs and all real semi automatic pistols.
Eventually the slide and frame will be worn to a point where they will need to be replaced, or you would need a new gun.
I would recommend that you put some really thick grease on the contacting areas in the slide and frame to make it last longer, the only other thing to help with wear besides not shooting it lol
 

·
Registered
Joined
·
387 Posts
Discussion Starter · #3 ·
I know it's worn out, it has like 7 years old, But why the slide is more forhead compares to the frame?, why they are not flush together any more?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top