Airsoft Sniper Forum banner
1 - 5 of 5 Posts

·
Registered
Tokyo Marui VSR 10 // Tokyo Marui Mk23 x2 // Tokyo Marui G18C
Joined
·
37 Posts
Discussion Starter · #1 ·
I’m building a second VSR from all the parts I’ve test - all good quality and fairly new.

the only thing I’m missing is the clicker pin, spring and screw for the bolt handle..

I can’t find anywhere in the USA online that sells them.. Can anyone point me in the right direction. I’d also be willing to buy someone’s spares if possible.

Automotive tire Automotive lighting Font Circuit component Passive circuit component
 

·
Registered
Joined
·
778 Posts
I'Ve heard of using a spring and a ball bearing
 

·
Registered
Joined
·
1,300 Posts
Def a tricky part to find. Could try and find some boneyard clone beater rifle for cheap just to get those small parts. I’ve used a small screw that I cut, rounded off and polished along with a small spring from the hardware store.
 

·
Registered
Joined
·
89 Posts
$5 CAD and I can get one sent your way, I ordered some extra detent pins and springs direct from Maple Leaf last year for custom builds. Apparently certain brands of bolt handles and end caps (Action Army), don't include them. I have a couple sets left, and can definitely spare one. As for the screw in the bolt handle (back of it I am assuming), it's an M4x12. I'm sure you could get one at any hardware store.
 

·
Registered
Tokyo Marui VSR 10 // Tokyo Marui Mk23 x2 // Tokyo Marui G18C
Joined
·
37 Posts
Discussion Starter · #5 ·
Def a tricky part to find. Could try and find some boneyard clone beater rifle for cheap just to get those small parts. I’ve used a small screw that I cut, rounded off and polished along with a small spring from the hardware store.
yeah that’s a good idea, if I can’t find them, I will just do that. Thanks
 
1 - 5 of 5 Posts
Top