Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,045 Posts
I need help removing the barrel from my agm l96

2 points zulu missed.....

1/ In your other thread you mention you use .2s these are strickly for the spray 'n' pray brigade! If you want accurate shots you need heavier ammo. I have no idea what one of these AGM things is cloned off, and quite frankly I dont want to know, I also have no idea what fps these things fall out the box doing, thats in a real sense not what it says on the box, but just to give you a clue, I use .28s in a rifle that is at 350 fps power, and upto .43s in my 500 fps set up.

2/ When was the last time you actually CLEANED your barrel?
You need to keep your barrel VERY clean if you want any kind of consistancy. You need to follow this.....

And then read this, if you don't believe me ;)....
 

·
Registered
Joined
·
1,045 Posts
Trust me when I tell you you will actually get more range from a bead blasted .28 than a mirror finished .2 ;) I'm not about to go into the physics of it, just take it as read.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top