Airsoft Sniper Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
So, I have a Bar 10 which I'm getting ready for a big game. I sat down at the computer and search for tight bore barrels... 6.05, 6.04, 6.03, 6.02, 6.01, even a 6.00 Inner diameter barrel! Which is the best Inner diameter for a barrel on a gun that shoots about 450-500 fps? and has any one used the Tanio Koba rifled barrel? I want accuracy and range. Thanks for any help.

Col. Zombie
 

·
Registered
Joined
·
807 Posts
ummmmmmm... 450-500 is a really big range... adding a TBB will increase your fps as it is, and there are a lot of other things you can do for accuracy in addition to getting a TBB. There are people that will swear by 6.04ish and people that will swear by 6.01, if you really want to you can get an EDGI at 5.98... I would suggest doing some reading around before just asking a very very open ended question like this. Especially on a Bar-10, there are quite literally hundred of threads on upgrades you can do for it, both here and on many other forums. If you are new to the sport you should do some more research on your gun... the Bar-10 is a TM VSR clone... so anything that would work on a VSR will work on the Bar-10. There are enough threads out there to keep you reading about DIY upgrades as well as part upgrades and custom projects for days on the subject...
 

·
Registered
Joined
·
207 Posts
Hey guys this question has been answered a thousand times already e if you would take simply five minutes of your time and searched around the VSR boards I bet that you could find plenty of info on how to make your rifle better. Be glad I am not a mod because if I was I would really be tearing you a new one right now.
 

·
Registered
Joined
·
1,045 Posts
If you get anything less then a 6.03 then brace your self for nice fps and shite accuracy.

Known fact, most people over here are swapping out there 6.01s in favour of a 6.05 because it yealds better accuracy.

...... Just to save him searching ;)
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #5 ·
Sorry if this question has been asked before. I looked around on this forum and others for about an hour before asking the question, I must have just missed it. let me narrow the question. I have a JG bar 10 with a nine ball bucking and will soon get either pdi or laylax internals. I want this gun to be very accurate at +/- 200'. I'm not expecting 1/2 inch groupings but I want all my shots to hit. I felt like I needed to clear this up, I don't want the mods to mad at me.
 

·
Registered
Joined
·
807 Posts
PLEASE search??? quite literally right under this thread is one that talks about VSRs... There is an entire section on the forum dedicated to them entitled VSR Rifles... I know the search on the forum isnt that great (i end up using google and narrowing results to the forum) but really???

http://www.airsoftsniperforum.com/phpBB/phpBB3/viewtopic.php?t=621

http://www.airsoftallies.com/sniper-rifle-upgrades-modifications-f8/jg-bar-10-free-mods-tutorial-with-pics-t201.htm

http://www.airsoftretreat.com/forums/index.php?topic=50324.0

... thats from 90 sec of google and those are just the DIY mods...
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #7 ·
I know how to modify a VSR 10 and I'm not asking "is PDI or Laylax better?" I know all of that I just was wondering about inner barrel diameter and which one the people on this forum recommend (not brand, inner diameter). There is a TON of stuff about "PDI or Laylax" and a lot of modification instructions. that is Not what I was wanting to know. my second post was clearing up the conditions the inner barrel would be in with the same question as I originally posted. please, point me to a post comparing different inner barrel diameters in an air-soft sniper because I could not find one. alls I saw was for AEGs on Air-soft Canada. also, WHY do you recommend whatever you recommend?
Thanks

Col. Zombie
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top