[Fumbduc]

Hello! Long time lurker making an intro post. I use a JG Bar 10 G-Spec primary with a TM Socom MK23, and have been playing airsoft for a few years now. I've been tuning my rifle based off all the information from this forum, and have made fantastic progress with the help of this community.

Build specs:

• JG Bar 10 G-Spec base
• 430mm Maple Leaf Crazy Jet
• AA Hop Chamber
• Maple Leaf Decepticon bucking
• Maple Leaf Omega Nub
• Stock cylinder/cylinder head
• AA 90 degree trigger assembly and piston
• AA spring guide
• AA m170 spring, cut slightly for field limits

Shoots .45g at ~320fps, accurate but quite loud. Currently on the quest to remove a loud pop coming from the cylinder/trigger assembly, despite a good air seal and padding. Looking forward to interacting with the community!

 

[Doctor Jest]

You are wise in your choices.

Welcome ;-)

 

[Akami]

Welcome here!

Damn, stock cylinder and M170? Surprised it's still going on well. Also about the sound, have you tried to do airbrakes?

 

[Fumbduc]

Welcome here!

Damn, stock cylinder and M170? Surprised it's still going on well. Also about the sound, have you tried to do airbrakes?

Yup surprisingly no issues that I've found with the cylinder, I have a new cylinder head coming in however. As for the airbrake, I'd be interested to try it but I'd have to look into how to get one on the AA piston, if not I'll have to order one with an airbrake.

 

[SiliconeSword]

Howdy, glad to have you