PDI 190%-$19
Modify Tempered stainless 8mm bushings
Either Firefly bucking-$20.75, or Systema bucking hop packing for airsoft aeg-$6.75
regular old nub,(I hear there are different versions)-$2 or so
Prometheus Aero cylinder head for ver 6-$12
Deep fire Aluminum air nozzel-$10.10
Systema area 1000 cylinder type O-$12
Either system super core-$50, or SHS piston ver. 2/or 3-$15
Systema Energy piston head w/ball bearings- $25
Extra O rings(not sure which type)- think they are like $6 for 6
Prometheus version 2&8 spring guide w/ball bearings- $24
Prometheus Normal type torque gear est for ver.7 (TM M14)-$100
Prometheus high speed gear set for ver 7 (TM M14)-$100
prometheus EG double torque gear set for ver.7 (TM M14)-$100
Gate GDS-4004-AB Mosfet with active braking- $50
SHS high torque Motor(short)-$39
Modify Torus Ver.2 reinforced 8mm Gearbox w/tappet plate-$73
Element reinforced hop up seal chamber for marui type M14 series Airsoft AEG-$19
Madbull airsoft 6.01 ultimate tightbore barrel-$40
Strike everything but the Spring and get a TM M14 instead. TM is a good solid brand and the internals can handle a lot. I have a AUG from TM for about 8 years and besides some tuning and a spring swap to bring it to 400FPS it hasn't need any internal work. Honestly with all the parts you want to buy you might as well get a good solid brand and not have to worry about the internals so much.
A TM M14 with the $19 spring you listed comes to $454 which is $12 less then the total for just the parts you want. Look closely at what you want to buy. You are more or less dropping a TM gearbox into a CYMA and spending more money the it would cost to just buy a TM M14
As I said on your other post making a DMR takes a lot of time and money. You're better off getting a good solid brand and slowly working towards your goal instead of getting something that won't stand the test of time as well. Remember in airsoft you really do get what you pay for.
Either Firefly bucking-$20.75, or Systema bucking hop packing for airsoft aeg-$6.75
regular old nub,(I hear there are different versions)-$2 or so
Prometheus Aero cylinder head for ver 6-$12
Deep fire Aluminum air nozzel-$10.10
Systema area 1000 cylinder type O-$12
Either system super core-$50, or SHS piston ver. 2/or 3-$15
Systema Energy piston head w/ball bearings- $25
Extra O rings(not sure which type)- think they are like $6 for 6
Prometheus version 2&8 spring guide w/ball bearings- $24
Prometheus Normal type torque gear est for ver.7 (TM M14)-$100
Prometheus high speed gear set for ver 7 (TM M14)-$100
prometheus EG double torque gear set for ver.7 (TM M14)-$100
Gate GDS-4004-AB Mosfet with active braking- $50
SHS high torque Motor(short)-$39
Modify Torus Ver.2 reinforced 8mm Gearbox w/tappet plate-$73
Element reinforced hop up seal chamber for marui type M14 series Airsoft AEG-$19
Madbull airsoft 6.01 ultimate tightbore barrel-$40
Strike everything but the Spring and get a TM M14 instead. TM is a good solid brand and the internals can handle a lot. I have a AUG from TM for about 8 years and besides some tuning and a spring swap to bring it to 400FPS it hasn't need any internal work. Honestly with all the parts you want to buy you might as well get a good solid brand and not have to worry about the internals so much.
A TM M14 with the $19 spring you listed comes to $454 which is $12 less then the total for just the parts you want. Look closely at what you want to buy. You are more or less dropping a TM gearbox into a CYMA and spending more money the it would cost to just buy a TM M14
As I said on your other post making a DMR takes a lot of time and money. You're better off getting a good solid brand and slowly working towards your goal instead of getting something that won't stand the test of time as well. Remember in airsoft you really do get what you pay for.
