Airsoft Sniper Forum banner

JG Bar-10 Accuracy Probs

6973 Views 24 Replies 8 Participants Last post by  Milli
First off, I am new to sniping. I recently bought a JG Bar-10 rifle. I like everything about it, except for the accuracy. I measured my shooting distances, and the rifle is perfectly accurate at 105 feet. However, at 150 feet, the rifle is very inconsistent. The scope has been dialed (at least, the best it can), but it is still shooting pretty bad. On occasion, I will have a shot spin off to the left or the right, hitting up to 10 feet away from the target. I've read that with this gun, I should be able to hit a head sized target from 150 feet. That is not the case. I am using .25 High Impact Crosman BBs. Is it possible it is the BBs? I doubt that, as they are seamless and appear perfect in shape. Any help would be greatly appreciated.
1 - 3 of 25 Posts
Golden Ball should work just fine. I have not used them personally, but i know quite a few guys on here swear by them.

The TDC is a required mod in my book. It will fix 95% of the problems with the hop up, the other 5% is bucking and hop arm.

Speaking of hop arm you should replace yours. the stock arm will destroy your bucking.
  • Like
Reactions: 1
arms are about $25.

I understand your hesitation for the TDC mod. I felt the same way. I finally got tired of missing shots due to the inconsistent hop. I have not looked back after doing it. You can find some people who are willing to do it for you, but that requires cash, time, shipping, blah blah blah.

I forgot, barrel spacers are a good idea as well. If you are going to buy some then they are between $10-$20 depending on brand, or you can just use tape.

Ultimately it is up to you on how you want to go with it. The TDC is a highly recommended by most people on here.
  • Like
Reactions: 1
Mine is completely stock, minus the TDC. I have ordered an S-trigger, and a piston and spring guide from Ranger.
  • Like
Reactions: 1
1 - 3 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top