Airsoft Sniper Forum banner

JG Bar-10: Advice and options

3645 Views 17 Replies 6 Participants Last post by  sounguru
Iv'e been scouring the internet for at least a month looking for a good starter rifle. I'm new to sniping and would appreciate some info on the Bar-10 such as good platform, cost friendly (for a sniper rifle), stock performance, yada yada yada. Is there another rifle out there that would be recomended by some of the more experianced snipers?
1 - 1 of 18 Posts
In airsoft, a fluted barrel is only looks, and perhaps a bit sturdyer than a ordinary barrel. A real fluted barrel serves the purpose of cooling the barrel quicker since it has a larger area of steel for the heat to radiate from. A consistent temperature in a real steel barrel means that you will have less problem with calculating the bullets trajectory when firing over large distances since the barrels temperature has much to do with how the bullet will act :)
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.