Airsoft Sniper Forum banner

JG BAR 10 Air brake Mod

9513 Views 13 Replies 9 Participants Last post by  zulu
Has anyone tried this and could they confirm if it actually increases FPS. Wouldn't it also shorten the life of the piston because it would hit the wall of the cylinder harder? Also, if you cut it half way, then would cutting it only 1/4, leaving 3/4, increase the FPS just a little bit?

If you don't know what I'm talking about, watch this.

[flash=350,287:xvzb4gk8]http://www.youtube.com/v/KRQVY-R0XPk&hl=en&fs=1[/flash:xvzb4gk8]
[/TD][TD]
http://images.proboards.com/banners/300x250_netshelter_gaming.html
[/TD][/TR][/TABLE]
1 - 1 of 14 Posts
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top