Airsoft Sniper Forum banner

JG BAR-10 problem

3957 Views 17 Replies 6 Participants Last post by  fuzzywolly
Hey, im sorry for the recap of this question over and over again, but when I did some research I didn't really understand what the people were trying to say. So basically the problem is everytime I shoot it would either curve more to the left or more to the right, I know the problem is the hop up, but the thing I don't get is how am I going to fix this problem. I have tried dissassembling it and reassembling it, but it wouldn't work. And everytime I try to zero the scope in it obviously wouldn't work so I have tried that for like hours. So I heard you should sand it, but it isn't good for the hop up system. All I know is I greatly appreciate it if someone give me a in depth explanation or make a video and sorry again for bringing this topic up, I really have been searching up info, but I didn't quite get it as much
1 - 1 of 18 Posts
If you can't change the weight of the ammo change the pressure of the spring. Put a weaker spring into the rifle and find that sweet spot for the .25's. And go for shear precision. Will have to work on your cammo and stalking skills as well.

It can be done, because I have done it ;) Would be suprised what you can do with a little elbo grease and some drive.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.