Airsoft Sniper Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Howdy! This thread may be long and is planned to be used for reference to other airsofters:

I have been playing airsoft weekly for about 5 years now. With plenty of knowledge and ownership on AEGs, I expanded my arsenal and bought bolt action sniper rife. - The JG bar 10. Since i'm new to the bolt action scheme of things I decided to get a cheap upgrade platform (JG bar 10). I am looking for great field performance and since i'm a AEG guy, I opened up my bar 10 and found 1000's of upgrade parts online all over the place. I have never seen part availability this great before and im kinda scratching my head with where to start.

I had my eyes peeled on the Novritsch tuning kit for the bar 10, but after I found out how overpriced his kit was compared to action army parts off of airsoftatlanta.com, I am sort of reluctant to the Novritsch kit and am looking to get a more cost effective kit. (More parts for the $)

I already got this bucking which made the bb's much more consistent:
Maple Leaf AST Hopup Rubber Bucking for TM WE VSR10 Airsoft GBB Pistols - 70° | Evike.com

Currently, I am planning the build out and am looking for your input on my part choice. (It's all action army so far)
AA=Action Army
AA cylinder - https://www.airsoftatlanta.com/products/action-army-vsr-10-cylinder-kit
AA spring guide - https://www.airsoftatlanta.com/products/action-army-vsr-10-spring-guide
AA M170 spring - https://www.airsoftatlanta.com/products/action-army-vsr-10-m170-spring
AA zero trigger - https://www.airsoftatlanta.com/products/action-army-zero-trigger-vsr-10
AA hop up chamber (Not sure if I want this becuase I might r-hop) - https://www.airsoftatlanta.com/products/action-army-vsr-10-hop-up-chamber

If I were to get the mentioned parts above here is the cost as of 10/10/2017 from Airsoft Atlanta
$325.95 W/O shipping
 

·
Registered
Joined
·
5,532 Posts
Your list of parts looks good.
You could also get a 430mm inner barrel if you are going to use 0.43gm or a 410mm inner barrel for 0.45gm bb's.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Next question will be if I should r-hop... I have heard really good things about r-hoping snipers but I have no idea where to even start since the hop on these rifles are different then AEGs. Are there and cost effective drop in kits by chance? Ive seen a few for some 200$! (OUCH)


*Main thing is if it is different from r-hopping AEGs since the hop up system is a bit unique
 

·
Registered
Joined
·
5,532 Posts
The Maple Leaf bucking is just as good as a R-Hop.
If you were going to use ceramic bb's then you would use R-hop but other than that, the maple is just as good.
Also, use a Maple Leaf AEG flat hopup tensioner.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top