Joined
·
6 Posts
Crap, I wish I had seen this about a week ago when I joined in, I have the same version, honestly what I did was, I took the stock screws out of the sides, separated the stock (spilit it in two.) and used fluffy stuff foam insulation for window jambs and stuff like that, let it set up and used a piece of this steel wire to shave the excess from off the top and edges (of both sides) . also used a razor blade to cut the holes for the weights, internals, etc.. I may have to say, it was a lot of work, But it was definitely worth it.
but that's my $.02
but that's my $.02
