Airsoft Sniper Forum banner
1 - 20 of 53 Posts

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #1 ·
Well like I have said in other posts.... I have a KC-02 coming to my house here some time this week. It already has a wooden stock on it, as well as an Ra-Tec 6.01 inner barrel through her.

I have ordered an Archangel 10/22 target stock, http://www.opticsplanet.com/pro-mag-ruger-10-22-archangel-deluxe-target-stock-aats1022.html , should be here by the weekend or so.

I will also be adding an Npas system to the rifle, and possibly SBR the rifle to make it great for a CQB rifle. So I may be making my own barrel for it as well :D

I will get some pics and some status of the build as it comes up.
 

·
Registered
Joined
·
318 Posts
Wouldn't it be cool to fabricate a vertical grip that went up against the magazine, that could also help guide the magazine into place. You know what I mean?
 

·
Registered
Joined
·
890 Posts
So out of curiosity is the kc02 a direct drop in fit to any 10/22 stocks?
Basically I've been looking for something new which I will be able to call actually unique. This is without spending over a grand to put a single rifle together.

I'm about to build my backup m4 right now ( I actually already have everything or I have found the parts used for a fairly decent price. ebay ), but after that I would very much like to do a tapped gas rifle so I can get my feet wet with gas guns in general.

With those two things the kc02 seems to fit the bill perfectly.
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #12 ·
Wait till you see what I have planned for mine ;)


Been scouring the web for a few things to make her "mine", and like everyone around here says, I will build it and probably end up selling it anyway.


The rifle isn't a direct drop in. If you look at the pics that george posted you can see that tab on the back of the receiver..... real steel 10/22's don't have that, they just have a single mounting point forward of the mag ( if I remember correctly). So to be a drop in for any 10/22 stock you either need to modify the stocks, or just cut that tab off and call it a day.
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #15 ·
Well down here at my in-laws house and upon checking the tracking number for the stock..... it is sitting on my front porch. I can only hope that the rifle is sitting there for me as well :D


If so I will try and get some pics up and let you guys see what I am planning on doing with this new project.
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #16 · (Edited)
Well rifle is at my house and it is time for me to start "woogieing" this rifle!!!


What do you guys think for barrel ports...... just plain jane holes or slots? I do have access to a Bridgeport mill as well as a good sized lathe now, so plan on doing some custom work on this baby!


Going to be my CQB sniper beast!



Ok well I got home and the rifle is here now. After some dremmel work, and filing I was able to get the rifle into the Archangel target stock. She still needs a little bit of work to fit nicely, but that will come in time. Was able to put 2 mags through her, and she has one heck of a pop to her, and she will really be loud inside a building!

I am planning on cutting back the barrels, and adding a faux suppressor at the end, and a few other things as well.


I will try and have some pics up tomorrow.
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #20 ·
That is still the stock outer barrel for now ..... I am looking now on Ebay for some carbon fiber scrap, and then I will make some caps for the ends.

Right now I have a WE M4 Npas system for the rifle, but I can not for the life of me figure out how to install it! Being as I am probably only going to be using this as a CQB/Scout rifle I am needing the fps to be a very consistent 350-400 ( depending on field ) Would anyone have any idea on how to install this darn thing?

Barrel idea.....

http://www.shootersdiscount.com/car...22-thm-carbon-fiber-barrel-w/compensator.html

Something like this, but I will have something else at the end of her ;)
 
1 - 20 of 53 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top