Airsoft Sniper Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Hello

My KJW Xelerator hicapa is having problems cycling.
As i pull the trigger, slide goes back but the hammer engages too fast and so it will block the slide so it wont slide forward.
And the gun sometimes shoots 2-3 round bursts.





Now The Almighty Internetz says that it's the leaf spring that is causing this problem but before i go buy replacement parts i'd like to know if you people have had this problem and how did you fix it.

Thanks in advance!
 

·
Registered
Joined
·
61 Posts
Hi,google we m&p full auto fix,i did it when my xdm fired in bursts
 

·
Registered
Joined
·
902 Posts
If you try pulling back the hammer and it doesn't stay locked back, your sears are out of alignment. You will have to remove the bottom pin in your handguard and refit them. Luckily you won't need replacement parts. It's a very easy fix.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top