[sfgiantsfan96]

Hey guys,

Now i just have a few quick questions regarding what external upgrades can be attached to the KJW KC-02. I have read on other reviews and threads saying that "most" aftermarket parts will go on it but i know that it will be just my luck that i buy the parts that don't work. If you know of any specific parts/companies that work with this gun i would greatly appreciate it if you could let me know

The parts that i have found and would like to attach to my gun if possible are

Crane Stock
http://www.evike.com/product_info.php?cPath=25_113_541&products_id=32360

Pistol Grip
http://www.evike.com/product_info.php?manufacturers_id=&products_id=27113

If you know if these do/don't work please let me know

 

[woogie]

1....
Start there first.

2...
Then take a look at this. Especially look at number 6

3... Search




Now to the post at hand..

As far as the parts, they should fit.... but with everything in airsoft there may need to be some kind of fitting or modding to get it to work if needed.

 

[sfgiantsfan96]

1....
Start there first.

2...
Then take a look at this. Especially look at number 6

3... Search

I dont understand this part.

Thank you for your help

 

[akfortyseven]

You need to make an intro post (the first link) and work on your grammar (the second link). When he says search he means google it.

The stock looks like it will fit no problem but that grip is an AEG grip. I don't think it will fit but don't quote me on that.

 

[wesley810]

And always remember; a dremel is your best friend when it comes to slight fitment issues!

 

[bobgengeskahn]

Although you might want to try a real steel AR grip first. A lot of the manufacturers like to use Mil Spec parts when they can, i.e. if they don't have to use an over sized AEG grip.

 

[sfgiantsfan96]

What is the difference between an AEG grip and the grip that the KJW KC-02 would use?

 

[bobgengeskahn]

AEG Grips are made wider with 4 set screws to make room for the motor. Real AR grips are narrower and only use 2... or maybe 1 screw (it's been a while since I've played with mine).

 

[sfgiantsfan96]

Ahh ok well if i were to buy the KJW KC-02 and then look and see how many screws were in the grip would that help me figure out what would fit and work best on it?

 

[akfortyseven]

I assume so