Airsoft Sniper Forum banner

KJW KC-02 External Upgrades

6750 Views 9 Replies 5 Participants Last post by  akfortyseven
Hey guys,

Now i just have a few quick questions regarding what external upgrades can be attached to the KJW KC-02. I have read on other reviews and threads saying that "most" aftermarket parts will go on it but i know that it will be just my luck that i buy the parts that don't work. If you know of any specific parts/companies that work with this gun i would greatly appreciate it if you could let me know

The parts that i have found and would like to attach to my gun if possible are

Crane Stock

Pistol Grip

If you know if these do/don't work please let me know
1 - 2 of 10 Posts
Although you might want to try a real steel AR grip first. A lot of the manufacturers like to use Mil Spec parts when they can, i.e. if they don't have to use an over sized AEG grip.
AEG Grips are made wider with 4 set screws to make room for the motor. Real AR grips are narrower and only use 2... or maybe 1 screw (it's been a while since I've played with mine).
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.