Airsoft Sniper Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
Did a search and didn't find anything.

To me, this 10/22 replica seems like an ideal weapon. It's small, maneuverable, light, Gas powered and semi auto. I've been thinking of picking one up now for a little while. Thoughts?
 

·
Registered
Joined
·
90 Posts
Cool. I might try that one. I wonder how it would work on my p90??

Also I was wondering about rifling the barrels like the 6.01mm ones, you think that would work better for accuracy?
 

·
Registered
Joined
·
909 Posts
Cool. I might try that one. I wonder how it would work on my p90??

Also I was wondering about rifling the barrels like the 6.01mm ones, you think that would work better for accuracy?
It works well on anything it seems like. It allows lower FPS guns to hop heavies way out there.

I don't think rifling would work unless you did the opposite kinda like the TK twist barrels; instead of rifling sticking out, it would be twisted grooves cut along the inside of the barrel. I don't think actual rifling would work too well because the rifling "grabs" onto the ammo, and our ammo is plastic shooting at a low velocity; I could be wrong though.
 

·
Registered
Joined
·
90 Posts
I haven't tried them with a higher fps yet but will do on friday.. I was really lucky to get them from redwolf when they used to be at $54 bucks now they jumped the price to $86 each lol. The 510mm ones that are the longest they had

They are made of steel and they get really dirty so I have to clean them all the time.
 

·
Registered
Joined
·
909 Posts
I haven't tried them with a higher fps yet but will do on friday.. I was really lucky to get them from redwolf when they used to be at $54 bucks now they jumped the price to $86 each lol. The 510mm ones that are the longest they had

They are made of steel and they get really dirty so I have to clean them all the time.
Let me know how they do at the higher FPS. Some they they aren't good and some say that using heavy ammo will slow it down so the grooves will work. There's really a lot of different opinions on it.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top