[wesley810]

I was going to link that one. That thing is beautiful; I would be afraid of taking it off of the shelf and actually playing with it though.

 

[wesley810]

Droooool

Hmmm, ER hop? How hard would it be to fit that?

I've heard it's tricky, but there are people on here that can cut the barrel window for you and install the patch for a decent price.

 

[wesley810]

Is that the same as flat hop?

It's a bit different I believe. I forget what the flat hop actually is, but the ER-Hop is where the barrel window gets elongated and a rubber patch sits inside and the bucking slips over top of that. It really adds a ton of range to rifles.

 

[wesley810]

Cool. I might try that one. I wonder how it would work on my p90??

Also I was wondering about rifling the barrels like the 6.01mm ones, you think that would work better for accuracy?

It works well on anything it seems like. It allows lower FPS guns to hop heavies way out there.

I don't think rifling would work unless you did the opposite kinda like the TK twist barrels; instead of rifling sticking out, it would be twisted grooves cut along the inside of the barrel. I don't think actual rifling would work too well because the rifling "grabs" onto the ammo, and our ammo is plastic shooting at a low velocity; I could be wrong though.

 

[wesley810]

I do have 2 TK barrels and I did notice that with the low fps it shoots the bb's really far away.

Yeah I've heard that they are awesome with lower FPS rifles, but I've never used one.

 

[wesley810]

I haven't tried them with a higher fps yet but will do on friday.. I was really lucky to get them from redwolf when they used to be at $54 bucks now they jumped the price to $86 each lol. The 510mm ones that are the longest they had

They are made of steel and they get really dirty so I have to clean them all the time.

Let me know how they do at the higher FPS. Some they they aren't good and some say that using heavy ammo will slow it down so the grooves will work. There's really a lot of different opinions on it.