1st: Make an intro post
2nd: This is the wrong section
Can a mod please move this?
2nd: This is the wrong section
Can a mod please move this?
Kjw m700 upgrade list
okay guys , im new here so i apologize if i do anything wrong lol . first off im building my own custom KJW m700 from scratch , with the help from Bobcats thread a couple months back i decided im going to do the hpa rig running in my stock . please inform me if my list needs touching up .
palmers persuit hpa rig :
macroline kit 1/4-1/8 NPT
low pressure female stabilizer
cci 12 gram quick change adapter
free flow 300psi mini gauge
1/8 NPT 45 elbow
1/8-1/4 slipfit straight
BARREL:
edgi 6.01 tightbore
(please give me info if theres a cheaper barrel for the same quality and performance)
BUCKING:
9Ball bucking
DIY flat nub
BOLT:
King arms striker spring and impact plate
OR G&G striker spring (but i dont know where to get a steel impact plate seperate)
Kingarms air nozzle
EXTERNAL:
Steel cnc 14mm negatice adapter
Ncstar scope
airsoft gi suppressor
airsoft gi bipod
palmers persuit hpa rig :
macroline kit 1/4-1/8 NPT
low pressure female stabilizer
cci 12 gram quick change adapter
free flow 300psi mini gauge
1/8 NPT 45 elbow
1/8-1/4 slipfit straight
BARREL:
edgi 6.01 tightbore
(please give me info if theres a cheaper barrel for the same quality and performance)
BUCKING:
9Ball bucking
DIY flat nub
BOLT:
King arms striker spring and impact plate
OR G&G striker spring (but i dont know where to get a steel impact plate seperate)
Kingarms air nozzle
EXTERNAL:
Steel cnc 14mm negatice adapter
Ncstar scope
airsoft gi suppressor
airsoft gi bipod
1 - 6 of 6 Posts
Sorry , where should I post1st: Make an intro post
2nd: This is the wrong section
Can a mod please move this?
1. Read rules: Rules
2. Make an intro post here: New Member Introductions & Tips - Airsoft Sniper Forum
3. Follow rules
4. This is not a TM vsr, is it?
5. Put it in the Tanaka or "Other" threads.
6. Apology accepted, but please read up on the rules and do a little bit of research before posting.
2. Make an intro post here: New Member Introductions & Tips - Airsoft Sniper Forum
3. Follow rules
4. This is not a TM vsr, is it?
5. Put it in the Tanaka or "Other" threads.
6. Apology accepted, but please read up on the rules and do a little bit of research before posting.
This is what pisses me off. New members here ask a question and the only answer they get is a bunch of pissy members to shit on their mistakes? How many times have you posted in the wrong section? Everyone does from time to time.
To ACTUALLY answer his question,
Yes, your list looks great. The parts you have seem to be good, but I think you should try an R-hop before you try anything else. Every other setup I've used causes curving, my old ER hop fixed that.
The steel impact plate isn't necessary until you start to see harmful wear on your original plate. Don't spend the money until you need to.
I wouldn't recommend a full length, 630mm uncut barrel WITH a mock silencer, since having a five foot gun can be a hassle sometimes.
For HPA- just be sure that you have two push connect fittings for 1/8 NPT threads and 1/4 inch macroline, and one 90 degree and one 45 degree fitting, both in 1/8 NPT threading. If you run a long magazine, go for two 90 degrees instead of the 45.
Any questions I'm here for you…
To ACTUALLY answer his question,
Yes, your list looks great. The parts you have seem to be good, but I think you should try an R-hop before you try anything else. Every other setup I've used causes curving, my old ER hop fixed that.
The steel impact plate isn't necessary until you start to see harmful wear on your original plate. Don't spend the money until you need to.
I wouldn't recommend a full length, 630mm uncut barrel WITH a mock silencer, since having a five foot gun can be a hassle sometimes.
For HPA- just be sure that you have two push connect fittings for 1/8 NPT threads and 1/4 inch macroline, and one 90 degree and one 45 degree fitting, both in 1/8 NPT threading. If you run a long magazine, go for two 90 degrees instead of the 45.
Any questions I'm here for you…
Thankyou bobcat ! Could I pm you I have tons of questions.This is what pisses me off. New members here ask a question and the only answer they get is a bunch of pissy members to shit on their mistakes? How many times have you posted in the wrong section? Everyone does from time to time.
To ACTUALLY answer his question,
Yes, your list looks great. The parts you have seem to be good, but I think you should try an R-hop before you try anything else. Every other setup I've used causes curving, my old ER hop fixed that.
The steel impact plate isn't necessary until you start to see harmful wear on your original plate. Don't spend the money until you need to.
I wouldn't recommend a full length, 630mm uncut barrel WITH a mock silencer, since having a five foot gun can be a hassle sometimes.
For HPA- just be sure that you have two push connect fittings for 1/8 NPT threads and 1/4 inch macroline, and one 90 degree and one 45 degree fitting, both in 1/8 NPT threading. If you run a long magazine, go for two 90 degrees instead of the 45.
Any questions I'm here for you…
1 - 6 of 6 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Airsoft Sniper Forum
A forum community dedicated to Airsoft Sniper firearm owners and enthusiasts. Come join the discussion about optics, gunsmithing, styles, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
Top Contributors this Month
View All
SiliconeSword
130 Replies
Leo Greer
70 Replies
Akami
66 Replies
Recommended Communities
