Airsoft Sniper Forum banner

KJW m700

2193 Views 9 Replies 5 Participants Last post by  cerboknight
well I have decided to go out on a limb and I've ordered a KJW m700 take down version however I understand there are a few problems with consistency on the stock barrel considering a 6.1

I was planning on buying

I also understand its compatible with some tanaka parts based on that knowledge I also planned to order


and on a side note I've heard that this gun is capable of taking the tanaka 29 round mags does anyone have some info on this?

Please feel free to input ur knowledge or make some suggestions all are much appreciated :)
1 - 1 of 10 Posts
I'm using a madbull 6.03, it stops just inside the king arms adaptor so it's probably an inch longer than the stock barrel. I also use the Tanaka long mag, it needed rubbed down with wet and dry paper to make it fit smoothly, but other than that it works fine.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.