Airsoft Sniper Forum banner

KJW M700P Build

72543 Views 94 Replies 31 Participants Last post by  ahp
I have been working on this gun for a while and wanted to share it with you all.

Gun: KJW M700P
Scope: Matrix 3-12x50 Illuminated Reticle Sniper Scope

Internal upgrades:
King Arms Air Seal Chamber
G&G Rubber Air Seal Set
CNC Chamber Conversion Kit
EdGI 6.01mm Precision Tight Bore Inner Bull Barrel
G&G Steel Cocking Piece
Palmers HPA Rig

External Mods:
Cut 5 inches from outer barrel
Custom thread adapter for 14mm CCW
10 inch custom silencer
Harris Bipod

Here is a test video I made today shooting it at the 200 foot range at Black Ops Airsoft, I need to tweak the camera mount a bit for tomorrows game:

  • Like
Reactions: 1
1 - 2 of 95 Posts
Do you have any play between the vsr conversion and the hop casing theres a fair bit on my tanaka and you can easily rotate the barrel.

I remedied this by ptfe taping the barrel and hop before fitting to the housing so there is no play at all.The barrel can still be rotated but its a lot stiffer now.

I also ptfe taped the hop bar,as the edges seemed quite sharp and i had cut through a bucking and know of others doing similar.To me this is the worst part of the whole design.
Okay thanks. I may have to pick up a kjw to see the differences.
My pax kit is about 3 years old and all my others were older and had a sharp bar :(
1 - 2 of 95 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.