[reezo]

I second what was said above. A friend of mine had the same problem..

On a second note - and related to this kind of magazines: is it normal for the mag
to wobble a little when sitting in place? The bolt still catches the BB and loads it and the mag valve sits below the bolt..but it still wobbles a little in the sense that you could push it a little more towards the receiver or tilt it a bit.

I think this is kinda normal and allows the bolt to slide easily without tearing against the valve.. But I might have to shim the receiver to make the mag sit more on top..hence my doubt.

I used the thread since it is a similar question and same title I would have used I hope it is ok.

 

[reezo]

Yeah there is slight play in the mag,its also like this with the long mags.
If i remember my AICS was the one with the least amount off movement.

Trying to reduce it might be a good thing, anyway?

..if I could try and shim it by taking the lower receiver out and testing it on the magazine, I'd be happy ..and quick..but I suspect I might have to put everything back at each test and try it out "fo'real"

 

[reezo]

I had to fix my trigger in the last days and now my
Rig needed some Teflon taping..next thing I'll try and fix the wobble and let you know. Project guns..have your life and your wallet ready.